Peplink Pepwave MAX HD4 HW3 Router Firmware 8.1.1
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: fw-b1_210hw4_310hw4_br1ent_transit_m700hw3_hd2mini_hd4-8.1.1-build5040.bin.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
New Features:
– [20X / 380X / 580X] Added support for Flex Module Mini VDSL
Compatible with X Series: 20X, 380X, 580X
– [Firewall] Added support for firewall filtering by DSCP
Compatible with All Models
– [Outbound Policy] Added support for Outbound Policy by DSCP
– [SpeedFusion Cloud] Added the ability to select Cloud Applications for the SpeedFusion Cloud
Compatible with All Models (Except FusionHub)
Melhorias:
– [API] Added new API to configure WAN Settings
– [API] Added support for get and update the GPIO
– [CLI] Added RADIUS status supporting
– [Firewall] Added “KVM Management Port” and “KVM VNC Port” under Local Service Firewall Rules
– [IPsec] The IPsec SA Lifetime is now supporting 31536000 seconds (365 days)
– [System] Added PCI Compliance Mode: disable TCP and ICMP timestamp responses for PCI Compliance tests.
– [System] Added RADIUS / TACACS+ authentication log
– [System] Added the ability to configure the session timeout value under support.cgi
– [System] Remote Syslog server address is now supporting broadcast address
– [System] The LAN’s port name is now included in LAN Port Event Log
– [OpenVPN] Added the “Connection Security Refresh” option.
– [PepVPN] Every new PepVPN handshake initiated or accepted by the device is now visible in the Event Log
– [PepVPN] For PepVPN/SpeedFusion traffic, remote Serial Number is now included in the Session Logging.
– [PepVPN] The PepVPN Log is now located in an individual tab under Event Log
– [PepVPN] The PepVPN Status and Dashboard now show the “OSPF Area mismatch” message if needed.
– [QoS] Added the ability to rename QoS User Groups
Compatible with All Models
– 23096 [Captive Portal] Allowed Client supports Hostname.
– [SpeedFusion Cloud] Added ability to configure WAN Smoothing on all devices.
– [SpeedFusion Cloud] Added sub-tunnels on SpeedFusion Cloud > Connect Client to Cloud
– [OpenVPN WAN] Added support for OpenVPN as WAN. (license activated)
– [OpenVPN WAN] Added the option to define a preferred DNS resolver.
Compatible with All Models (Except FusionHub)
– [Air Monitor] Added support for Wi-Fi “Air Monitoring Mode”. The report can be viewed under InControl 2 > Reports > AirProbe Reports.
– [Wi-Fi Mesh] Added ability to accept incoming Mesh connection from AP One (Bridge Mode)
Compatible with Balance: 30 Pro, One
Compatible with MAX: BR1 MK2, Transit, 700 HW3 or above, HD2 HW5 or above, HD4
Compatible with MediaFast: 200, HD2/4
Compatible with X Series: PDX, MBX, 20X
Compatible with Surf SOHO: SOHO MK3
– [AP Controller] Added ability to “Set Firmware” directly in “AP > Controller Status > Access Point”
– [AP Controller] Added support for AP Mesh Configuration and Status reporting for AP One. Mesh combination: Balance/MAX/Surf SOHO MK3 (Build-in Wi-Fi) to AP One (Bridge Mode) | AP One (Bridge Mode) to AP One (Bridge Mode)
Compatible with Balance: All
Compatible with MAX: 700, HD2/4, Transit
Compatible with MediaFast: All
Compatible with X Series: EPX, SDX Pro, SDX, 580X, 380X, PDX, MBX
– [API / PoE] Added the ability to turn PoE ports on or off
Compatible with Balance: 30 Pro
Compatible with MAX: BR1 ENT, HD2/4
Compatible with MediaFast: HD2/4
Compatible with X Series: EPX, SDX Pro, SDX, PDX, MBX
– [Cellular] Added the ability to define Upload & Download Bandwidth values on Cellular WAN.
– [Cellular] SIM Toolkit page now shows the SMS Storage capacity
Compatible with Balance: 30 LTE/Pro
Compatible with MAX: BR1/2, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/HD4
Compatible with X Series: All
– [FlexModule] Added the ability to enable PoE on FlexModule Ethernet ports when they are configured as WAN
Compatible with X Series: EPX, SDX Pro, SDX
– [HA] The Web UI now shows the WAN connection & PepVPN status when the option “Establish Connections in Slave Role” is enabled
Compatible with Balance: 210 or above
Compatible with MAX: BR1/2, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: All
Compatible with X Series: EPX, SDX Pro, SDX, 580X, 380X, PDX, MBX, 310X
– [HD1 Dome] Added support for IP Passthrough
Compatible with MAX: HD1 Dome
– [LAN] Added LACP Suporte para the SDX
Compatible with X Series: All
– [NetFlow] Added options for additional NetFlow server, and Active/Inactive Flow Timeout values.
– [NetFlow] Added support for NetFlow information retrieval via SNMP
Compatible with Balance: 30 LTE/Pro, One/Two, 210/310 HW4 or above, 305/380 or above
Compatible with MAX: BR1 ENT, Transit, 700
Compatible with HW3 or above, HD2 HW5 or above, HD4
Compatible with MediaFast: All
Compatible with X Series: All
Compatible with FusionHub
– [UART] Renamed “UART” to “Serial” in the Web Admin / CLI / Event Logs
Compatible with MAX: BR1
Compatible with Slim/Mini/M2M/ENT, Transit, HD2 Mini
– [PDX, MBX, 310X] Added jumbo frame supporting.
Compatible with X Series: PDX, MBX, 310X
Resolved Issues:
– [Captive Portal] Fixed an issue where a blank page will be shown after logging into the Captive Portal via a second RADIUS server
– [Captive Portal] Fixed an issue where Client Bandwidth Settings from RADIUS does not work when the Captive Portal is configured on VLAN
– [Captive Portal] Fixed an issue where the Captive Portal is unstable when running for a long period of time
– [Captive Portal] Fixed an vulnerability where a binary file will be returned on HTTP Port 80
– [Client List] Fixed an issue where the Client List shows the download usage of offline devices.
– [OpenVPN WAN] Fixed an issue where the OpenVPN WAN accepted routes from the server
– [Outbound Policy] “Normal and High Application Compatibility” have been deprecated
– [Outbound Policy] Fixed an issue where the throughput performance will be degraded when an Outbound Policy by Domain Name has been applied.
– [SpeedFusion Cloud] Fixed an issue where Dynamic Weighted Bonding does not work on the SpeedFusion Cloud.
– [uPnP] Fixed the potential vulnerability
Compatible with All Models (Except FusionHub)
– [Firewall] Fixed an issue of Firewall Log showing inconsistent date and time.
– [Firewall] Fixed an issue where “Local Service” under “Firewall Rule > Event Logging” malfunctions.
– [Firewall] Fixed the issue where Firewall Log is not kept across device reboot.
– [PepVPN] Fixed an issue causing the device to not apply MSS clamping if the FusionHub is running on KVM and if the PepVPN tunnel is unencrypted.
– [PepVPN] Fixed an issue where PepVPN does not work under Drop-in with a Shared IP
– [PepVPN] Fixed an issue where PepVPN may become stuck on the “Updating Routes” status.
– [PepVPN] Fixed an issue where PepVPN may cause system instability
– [PepVPN] Fixed an issue where PepVPN tunnels establish only one WAN when all WAN interfaces are using the same IP address.
– [PepVPN] Fixed an issue where the PepVPN Test shows empty Device Names
– [Remote User Access] Fixed an issue where OpenVPN clients cannot route traffic to a different VLAN behind a Balance/MAX device.
– [Remote User Access] Fixed an issue where Remote Users may be disconnected after applying device configurations.
– [Security] Fixed the potential vulnerability of CSRF Protection
– [System] Fixed a rare issue of the Client List that causes system instability.
– [System] Fixed an issue of TCP SYN and RST packets are forwarded to WAN without NAT.
– [System] Fixed an issue where UPnP / NAT-PMP does not work if OpenVPN is enabled.
– [System] Fixed CVE-2020-11022 & CVE-2020-11023
– [WAN] Fixed an issue where the DNS-O-Matic service cannot be updated
– [Web UI] Fixed an issue where the icons and tooltips for the “Outbound Policy” and “Firewall Rules” features were displaying incorrect information if managed by InControl 2.
Compatible with All Models
– [AP Controller] Fixed an issue of HTTP to HTTPS Redirection does not work if the HTTPS port is not 443
– [AP Controller] Fixed an issue where the AP One 300M 5GHz does not work when both the 2.4GHz and 5GHz SSIDs are configured with same name
– [AP Controller] Fixed an issue where the Firmware Pack cannot be stored.
Compatible with Balance: All
Compatible with MAX: 700, HD2/4, Transit
Compatible with MediaFast: All
Compatible with X Series: EPX, SDX Pro, SDX, 580X, 380X, PDX, MBX
– [API / Cellular Cat-18] Fixed the issue where the device was unable to send SMS via API.
Compatible with Integrated Cat-18 cellular models
– [B20X / BR1 IP55 HW4] Fixed an issue where the throughput is limited by the lowest speed port
Compatible with MAX: BR1 IP55 HW4
Compatible with X Series: 20X
– [B20X] Fixed an issue causing Bonjour Forwarding to not work on the B20X
– [B20X] Fixed an issue of where the LAN Interface numbers are not correct
Compatible with X Series: 20X
– [Balance Two] Fixed an issue where VLAN Tagging does not work.
Compatible with Balance: Two
– [Drop-in Mode] Fixed an issue where the Static Route does not work if the Gateway is on the WAN side.
Compatible with Balance: All
Compatible with MAX: All
Compatible with UBR: UBR LTE
Compatible with MediaFast: All
Compatible with X Series: All
– [Firmware Upgrade] Fixed an issue causing Firmware upgrades does not work.
Compatible with MAX: BR1/2 Series (Except ENT), 700 HW1-2, HD2 HW1-4
Compatible with UBR: UBR LTE
Compatible with Surf SOHO: SOHO HW2 / MK3
– [FusionHub] Fixed an issue where URL Logging &Session Logging are missing in the Event Logs
Compatible with FusionHub
– [HA] Fixed an issue where the Master device will keep its Master status even if the LAN ports are disconnected.
Compatible with X Series: SDX, PDX, MBX, 310X
– [InControl 2] Fixed an issue where IC2 shows the incorrect APN if using Remote SIM
Compatible with Integrated cellular models with Remote SIM supported
– [IP Passthrough] Fixed an issue where the client is unable to obtain a correct IP address after failover between IP Passthrough mode WANs
Compatible with Balance: 30 Pro
Compatible with MAX: BR1, Transit
Compatible with UBR: UBR LTE
Compatible with Surf SOHO: SOHO HW2 / MK3
Compatible with X Series: 20X
– [LAN] Fixed the issue where LAN broadcast packets forwarded to the WAN
Compatible with MAX: BR1 Classic, Mini, Pro, BR2
Compatible with UBR: UBR LTE
Compatible with Surf SOHO: SOHO HW2
– [Management Port] Fixed an issue where the Management Port is considered as a LAN port during HA mode.
Compatible with Balance: 305/380 or above
Compatible with MediaFast: 500, 750
Compatible with X Series: EPX, SDX Pro, SDX, 580X, 380X
– [MediaFast & KVM] Fixed an issue where the Virtual Machine Autostart does not work
Compatible with MediaFast: 500, 750
– [MediaFast] Fixed an issue where the Root CA certificate and key for ContentHub & MediaFast are stored on an unencrypted area of the firmware
Compatible with MediaFast: All
– [Remote SIM] Fixed an issue where the Remote SIM does not work after the WAN IP has been changed
Compatible with MAX: HD2 Mini, HD1/2 Dome
Compatible with SFE: SFE
Compatible with UBR: UBR LTE
Compatible with X Series: PDX, MBX
– [Wi-Fi AP & BR1 MK2 / SOHO MK3] Fixed an issue that causes system instability when using the Wi-Fi AP
Compatible with MAX: BR1 MK2, Hotspot, IP55 HW2-3
Compatible with Surf SOHO: SOHO MK3
– [Wi-Fi AP] Fixed an issue that causes the secondary RADIUS server to not work.
Compatible with Balance: 30 Pro, One
Compatible with MAX: 700, BR1/2, HD2/4, Transit (Exclude: BR1 ENT, HD2 Mini, HD1/2 Dome)
Compatible with MediaFast: HD2/4
Compatible with X Series: PDX, MBX, 20X
Compatible with Surf SOHO
– [LAN] Fixed an issue where LAN broadcast packets are forwarded to the WAN
– [Wi-Fi AP] Fixed an issue where the SSID does not broadcast
Compatible with Balance: 20X
Compatible with MAX: BR1 IP55 HW4
– [WINS Server] Fixed an issue that causes system instability when using the LAN > WINS Server.
Compatible with Balance: All (Except 20X)
Compatible with MAX: BR1 ENT, 700, HD2/4, Transit
Compatible with MediaFast: All
Compatible with X Series: EPX, SDX Pro, SDX, 580X, 380X, PDX, MBX
Download