Nikon Z 5 Camera Firmware 1.02 para macOS
Tipo de arquivo: Firmware.
Sistema operacional: Mac.
Nome do arquivo: F-Z5-V102M.dmg.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Alterar:
– Added support for NIKKOR Z 50mm f/1.2 S lenses.
– Fixed an issue that resulted in certain aperture values not being selected when control rings for the following lenses were rotated to stop aperture down in movie mode: NIKKOR Z 24–50mm f/4–6.3, NIKKOR Z 24–200mm f/4–6.3 VR, NIKKOR Z DX 16–50mm f/3.5–6.3 VR, NIKKOR Z DX 50–250mm f/4.5–6.3 VR
– Fixed an issue that prevented the TTL flash compensation value selected with the camera being reflected by the flash units, resulting in flash compensation not being applied, when: two or more flash units were controlled via radio AWL, and all flash units were in the same group.
Visualizando a versão do firmware da câmera:
– Ligue a câmera.
– Pressione o botão MENU da câmera e selecione a versão do firmware no menu SETUP para exibir a versão do firmware da câmera.
– Verifique a versão do firmware da câmera.
– Desligue a câmera.
Atualizando o Firmware da Câmera:
– Crie uma pasta no disco rígido do computador e nomeie como desejado.
– Download the file to the folder newly-created.
– Extract the file to a folder named “Z6Update”
– Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
– Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
– Insert the memory card into the camera and turn the camera on.
– Selecione a versão do firmware no menu SETUP e siga as instruções na tela para concluir a atualização do firmware.
– Quando a atualização estiver completa, desligue a câmera e remova o cartão de memória.
– Confirme se o firmware foi atualizado para a nova versão.
Download