MikroTik RouterOS X86 Firmware 6.47 RC 19
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: all_packages-x86-6.47beta19.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
MAJOR CHANGES IN v6.47:
– socks – added support for SOCKS5 (RFC 1928);
Alterações nesta versão:
– socks – added support for SOCKS5 (RFC 1928);
– bonding – improved slave interface MAC address handling;
– bonding – prefer primary slave MAC address for bonding interface;
– bridge – added logging message when a host MAC address is learned on a different bridge port;
– chr – improved stability when changing ARP modes on e1000 type adapters;
– console – prevent “flash” directory from being removed (introduced in v6.46);
– console – updated copyright notice;
– crs305 – disable optical SFP/SFP+ module Tx power after disabling SFP+ interface;
– defconf – fixed “caps-mode” not initialized properly after resetting;
– defconf – fixed default configuration loading on RBwAPG-60adkit (introduced in v6.46);
– discovery – do not send CDP and LLDP packets on interfaces that does not have MAC address;
– discovery – do not send discovery packets on inactive bonding slave interfaces;
– discovery – do not send discovery packets on interfaces that are blocked by STP;
– dot1x – added “radius-mac-format” parameter (CLI only);
– health – added “gauges” submenu with SNMP OID reporting;
– lora – added “ru-864-mid” channel plan;
– lora – fixed packet sending when using “antenna-gain” higher than 5dB;
– lora – improved immediate packet delivery;
– lte – do not allow running “scan” on R11e-4G;
– lte – fixed “band” value setting when configuration is reset on R11e-4G;
– lte – fixed “cell-monitor” on R11e-LTE in 3G mode;
– lte – fixed “earfcn” reporting on R11e-LTE6 in UMTS and GSM modes;
– lte – improved all APN session activation after disconnect on R11e-LTE;
– lte – report only valid info parameters on R11e-LTE6;
– lte – use APN from network when blank APN used on R11e-4G;
– ppp – fixed minor typo in “ppp-client” monitor;
– qsfp – do not report bogus monitoring readouts on modules without DDMI support;
– qsfp – improved module monitoring readouts for DAC and break-out cables;
– routerboard – added “mode-button” support for RBcAP2nD;
– sniffer – allow setting port for “streaming-server”;
– snmp – added “dot1qTpFdbTable” OID reporting for Q-BRIDGE-MIB;
– snmp – improved OID policy checking and error reporting on “set” command;
– supout – added “dot1x” section to supout files;
– system – correctly handle Generic Receive Offloading (GRO) for MPLS traffic;
– system – fixed “.auto.rsc” file execution (introduced in v6.46);
– system – fixed “check-installation” on PowerPC devices (introduced in v6.46);
– traceroute – improved stability when invalid packet is received;
– traffic-generator – improved memory handling on CHR;
– webfig – allow skin designing without “ftp” and “sensitive” policies;
– webfig – fixed “skins” saving to “flash” directory if it exists (introduced in v6.46);
– winbox – automatically refresh “Packets” table when new packets are captured by “Tools/Packet Sniffer”;
– winbox – fixed “Default Route Distance” default value when creating new LTE APN;
– winbox – removed duplicate “join-eui”, “dev-eui”, “counter”, “chain”, “size” and “payload” parameters under “Lora/Traffic”;
Other changes since v6.46.1:
– crs3xx – fixed “ingress-rate” property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– dhcpv6-client – improved error logging when when renewed address differs;
– fetch – fixed “User-Agent” usage if provided by “http-header-field”;
– lte – fixed multiple APN reactivation after deactivation by operator;
– netinstall – removed “Flashfig” from Netinstall;
– netinstall – removed “Make Floppy” from Netinstall;
– netinstall – signed netinstall.exe with Digital Signature;
– snmp – added “dot1qTpFdbTable” OID reporting for Q-BRIDGE-MIB;
– snmp – fixed “dot1dBasePort” index offset for BRIDGE-MIB;
– snmp – improved stability when polling MAC address related OID;
– w60g – use “arp” and “mtu” parameters from master interface when creating a new station;
– winbox – added “auto-erase” option to “Tool/SMS” menu;
Download