MikroTik RouterOS PPC Firmware 6.46 RC 1
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: all_packages-ppc-6.46rc1.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
MAJOR CHANGES IN v6.46:
– lora – added support for LoRaWAN low-power wide-area network technology for MIPSBE, MMIPS and ARM;
– package – accept only packages with original filenames (CVE-2019-3976);
– package – improved package signature verification (CVE-2019-3977);
– security – fixed improper handling of DNS responses (CVE-2019-3978, CVE-2019-3979);
Alterações nesta versão:
– ptp – disabled support for IEEE 1588 Precision Clock Synchronization Protocol until further notice;
– bridge – do not add dynamically VLAN entry when changing “pvid” property for non-vlan aware bridge;
– capsman – fixed MAC address detection for “common-name” parameter in certificate requests;
– certificate – added progress bar when creating certificate request;
– certificate – allow specifying “name” parameter for import (CLI only);
– crs3xx – improved system stability when initializing SFP modules;
– export – always export “ssid” value for w60g interfaces;
– fetch – do not allocate extra 500KiB on SMIPS;
– ipsec – fixed IPsec policy checking on RB4011 (introduced in v6.46beta68);
– switch – added “comment” property for switch vlan menu (CLI only);
– w60g – do not reset link when changing comment on station;
– w60g – fixed “monitor” command on disabled interfaces;
– w60g – move stations to new bridge when “put-in-bridge” parameter is changed;
– winbox – added enable/disable and comment buttons for “IP->SNMP->Communities” menu;
– winbox – fixed field validation with negative integers (introduced in v6.46beta);
– wireless – added “ETSI” regulatory domain information;
Other changes since v6.45.7:
– backup – fixed automatic backup file generation when configuration reset by button;
– backup – store automatically created backup file in “flash” directory;
– bonding – correctly remove HW offloaded bonding with ARP monitoring;
– bonding – properly handle MAC addresses when bonding WLAN interfaces;
– bridge – disable/enable bridge port when setting bpdu-guard;
– bridge – do not add bridge as untagged VLAN member when frame-types=admit-only-vlan-tagged;
– bridge – include whole VLAN-id in DHCP Option 82 message;
– btest – removed duplicate “duration” parameter;
– capsman – fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required);
– capsman – fixed channel auto reselection;
– capsman – improved DFS channel switching when radar detected;
– capsman – improved radar detection algorithm;
– ccr – improved general system stability;
– certificate – added progress bar when creating certificate request (CLI only);
– certificate – added support for certificate request signing with EC keys;
– certificate – allow specifying “file-name” parameter for export (CLI only);
– certificate – allow specifying “name” parameter for import (CLI only);
– certificate – improved CRL updating process;
– certificate – removed “key-size” parameter for “create-certificate-request” command;
– chr – added support for Azure guest agent;
– console – added bitwise operator support for “ip6” data type;
– console – fixed “address” column width when printing DHCPv4 leases;
– console – fixed IP conversion to “num” data type;
– console – fixed “tobool” conversion;
– console – properly detect IPv6 address as “ip6” data type;
– crs1xx/2xx – allow to set trunk port as mirroring target;
– crs305 – fixed sfp-sfpplus2 – sfp-sfpplus4 interface linking (introduced in v6.46beta28);
– crs3xx – correctly handle L2MTU change;
– crs3xx – do not send pause frames when ethernet “tx-flow-control” is disabled on CRS326/CRS328/CRS305 devices;
– crs3xx – improved interface initialization;
– crs3xx – improved switch-chip resource allocation on CRS317-1G-16S+, CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– crs3xx – improved system stability on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– crs3xx – remove previously set mirror-source property before changing it;
– defconf – fixed default configuration generation on SXT R (introduced in v6.46beta28);
– defconf – fixed default configuration loading on RBmAPL-2nD (introduced in v6.45);
– defconf – require “policy” permission to print default configuration;
– dhcpv4-client – allow empty “dhcp-options” parameter when adding new client;
– dhcpv4-client – fixed “dhcp-options” parameter setting when adding new client;
– dhcpv4-server – improved stability when RADIUS Interim update is sent;
– dhcpv6-client – properly update bind time when unused prefix received from the server;
– dhcpv6-client – properly update IPv6 address on rebind;
– dhcpv6-server – fixed logged error message when using “address-pool=static-only”;
– dhcpv6-server – include “User-Name” parameter in accounting requests;
– dhcpv6-server – made “calling-station-id” contain MAC address if DUID contains it;
– dhcvp6-client – fixed timeout when doing rebind;
– dot1x – added “reject-vlan-id” server parameter (CLI only);
– dot1x – added support for dynamic switch rules from RADIUS;
– dot1x – added support for “mac-auth” authentication type (CLI only);
– dude – fixed data retrieval over SNMP (introduced in v6.46beta44);
– ethernet – automatically detect interface when using IP address for power-cycle-ping;
– ethernet – do not enable interface after reboot that is already disabled;
– ethernet – send requests only from ethernet interface when using MAC address for power-cycle-ping;
– fetch – fixed “dst-path” not allowed to create new directories (introduced in v6.46beta34);
– fetch – improved stability when processing large output data;
– gps – use “serial1” as default port on RBLtAP-2HnD;
– hotspot – fixed “html-directory” not allowed to create new directories (introduced in v6.46beta34);
– hotspot – fixed non-local NAT redirection to port TCP/64873;
– hotspot – fixed RADIUS CoA “address-list” update;
– ike1 – fixed minor spelling mistake in logs;
– ike2 – fixed IPv6 policy generation (introduced in v6.46beta28);
– ike2 – improved CHILD SA rekey process with Apple iOS 13;
– ike2 – improved stability when retransmitting first packet as responder;
– ipsec – added “error” topic for identity check failure logging messages;
– ipsec – fixed DNS resolving when domain has only AAAA entries;
– ipsec – fixed policy “sa-src-address” detection from “local-address” (introduced in v6.45);
– ipv6 – changed “advertise-dns” default value to “yes”;
– led – fixed default LED configuration for RBLHG-2nD and RBLHG-5HPnD;
– log – increased log message length limit to 1024 characters;
– lte – added support for D402 modem;
– lte – added support for LM960A18;
– lte – added support for Telit LM960 and LE910C1 modems;
– lte – do not allow setting 3G and GSM modes on LTE only modems;
– lte – fixed band setting on R11e-4G;
– lte – fixed network registration on R11e-LTE-US;
– lte – fixed Sierra WP7601 driver loading;
– lte – fixed USB network device driver initialization (introduced in v6.46beta9);
– lte – fix “operator” names not being displayed properly;
– lte – improved modem initialization;
– lte – show “primary-band” only for LTE modems;
– lte – use /128 prefix for IPv6 address on LTE interface;
– lte – use interface from RA when “ipv6-interface=none” and IPv6 enabled;
– ppp – added 3GPP IoT “access-technology” definitions;
– ppp – added support for Sierra WP7601;
– ppp – disable DTR send when using at-chat;
– quickset – added “LTE AP Dual” mode support;
– quickset – added “LTE APN” dropdown support;
– quickset – fixed “LTE Band” checkbox display;
– route – fixed area range summary route installation in VRF;
– routerboard – fixed default CPU frequency on RB750r2 (“/system routerboard upgrade” required);
– routerboard – fixed USB configuration export on RBLtAP-2HnD;
– routerboard – hide “memory-frequency” parameter for RBLtAP-2HnD;
– sfp – correctly read EEPROM data from SFP modules (introduced in v6.46beta38);
– sniffer – allow filtering by packet size;
– snmp – added “disabled” and “comment” parameters for communities (CLI only);
– snmp – added option to monitor “link-downs” parameter using MIKROTIK-MIB;
– snmp – fixed “dot1dBasePort” index offset for BRIDGE-MIB;
– snmp – fixed “ifLastChange” OID reporting for IF-MIB;
– snmp – fixed “radio-name” (mtxrWlRtabRadioName) OID support;
– snmp – improved interface status reporting for IfOperStatus OID;
– snmp – improved LLDP interface returned index and type;
– snmp – return only interfaces with MAC addresses for LLDP;
– snmp – use “src-address” also for traps;
– ssh – fixed output printing when “command” parameter used;
– supout – include information from all LTE interfaces;
– supout – removed “file” option from “/system sup-output” command;
– switch – correctly update dynamic switch rule when dhcp-snooping is enabled;
– switch – ignore “default-vlan-id” property after switch reset on RTL8367 switch chip;
– switch – show “external” flag for bridge hosts on MT7621, RTL8367 switch chips;
– system – fixed branding package installation (introduced in v6.46beta34);
– telnet – fixed successful connection establishment output in console (introduced in v6.46beta28);
– timezone – updated time zone database to version 2019c;
– tr069-client – added CellDiagnostics parameter support;
– tr069-client – added LTE band and cellular technology selection parameters;
– tr069-client – added LTE RSCP, ECNO and ICCID parameter support;
– tr069-client – added multiple LTE monitoring parameters;
– tr069-client – fixed firmware update (introduced in v6.46beta34);
– tr069-client – reconnect to ACS when “ConnectionRequestURL” is updated;
– upgrade – improved auto package updating using “check-for-updates”;
– ups – improved compatibility with APC UPS’s;
– usb – general USB modem stability improvements;
– userman – fixed customer referencing on WEB (introduced in v6.46beta9);
– userman – updated Authorize.Net to use SHA512 hashing;
– w60g – added “region” setting to limit allowed frequencies (CLI only);
– webfig – fixed link to Winbox download;
– winbox – added “ip-address” and stats columns in “IP/Kid-Control/Devices” menu;
– winbox – added “public-address-ipv6” parameter to “IP/Cloud” menu;
– winbox – added “reset-counters” button to “IP/Kid Control/Devices” menu;
– winbox – added “tx-info-field” parameter to “Wireless/W60G” menu;
– winbox – added “Vendor Classes” tab in “IP/DHCP Server” menu;
– winbox – added wireless alignment LED types to “System/LEDs” menu;
– winbox – fixed allowed range for bridge filter “new-priority” parameter;
– winbox – fixed “CAPs Scanner” stopping;
– winbox – fixed “cluster-id” parameter setting in “Routing/BGP/Instances” menu;
– winbox – fixed file locking when uploading multiple files at once;
– winbox – fixed firewall limit parameter support for rates more than 4G;
– winbox – fixed invalid flag presence in “IP/SMB/Shares” menu;
– winbox – fixed “Routing” menu icon presence when there is no routing package installed;
– winbox – improved stability when transfering multiple files between multiple windows;
– winbox – properly show timestamp in file “Creation Time” field;
– winbox – removed “Set CA Passphrase” button from “Certificate” menu;
– winbox – renamed “Queue Limit” to “Queue Size” for “pcq-upload-default” and “pcq-download-default” parameters;
– winbox – replaced “kb” with “KiB” in “Tools/Packet Sniffer” menu;
– winbox – show “Switch” menu on RBwAPGR-5HacD2HnD;
– winbox – show “System/RouterBOARD/Mode Button” on devices that have such feature;
– wireless – added 4 chain MCS support for 802.11n wireless protocol (CLI only);
– wireless – added “indonesia4” regulatory domain information;
– wireless – added “push-button-5s” value for “wps-mode” parameter;
– wireless – added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD;
– wireless – allow using “canada2” regulatory domain on US lock devices;
– wireless – fixed 802.11n rate selection when managed by CAPsMAN;
– wireless – fixed RX chain selection;
– wireless – fixed sensor MAC address reporting in TZSP header;
– wireless – improved 802.11ac stability for all ARM devices with wireless;
– wireless – improved IPQ4019, QCA9984, QCA9888 wireless interface stability;
– wireless – updated “ukraine” regulatory domain information;
– wireless – updated “united-states” regulatory domain information;
Download