Intel Network Connections Software / Driver 22.1.102.0
Tipo de arquivo: Driver.
Sistema operacional: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Server 2008, Windows Server 2012.
Nome do arquivo: intel_lan_22.1.102.0.zip.
Bit: 64 Bit.
Licença: Grátis.
Descrição
NDIS 6.2 introduced new RSS data structures and interfaces. Because of this, you cannot enable RSS on teams that contain a mix of adapters that support NDIS 6.2 RSS and adapters that do not. The e1e6232 driver does not support NDIS 6.2 RSS. If you team one of these devices with a device supported by another driver, the operating system will warn you about the RSS incompatibility.
This applies to the following devices:
– Intel PRO/1000 EB and EB1 Network Connections
– Intel PRO/1000 PF Network Connections and Adapters
– Intel PRO/1000 PT Network Connections and Adapters
– Intel Gigabit PT Quad Port Server ExpressModule
– Network Connections based on the Intel 82566 Controller
– Intel PRO/1000 PB Dual Port Server Connection
– Intel PRO/1000 PB Server Connection
Install the Intel Ethernet Adapter
Installing an Adapter
– Turn off the computer and unplug the power cord. If performing a “hot plug” install, see your server documentation first.
– Remove the computer cover and the adapter slot cover from the slot that matches your adapter. You may utilize a slot that is longer than your adapter’s connector with no harm, but do not attempt to install in a slot that is shorter than the connector.
– Firmly place the adapter into the slot and secure the bracket.
– Replace the computer cover. Plug in the power cord.
Installing a Mezzanine Card
– Turn off the computer and unplug the power cord.
– Remove the computer cover.
– Align the PCIe connector on the mezzanine board with the connector and four plastic standoffs on the motherboard.
– Press the adapter until it is fully inserted into the MB connector and snaps into the four standoffs.
– Replace the computer cover. Plug in the power cord.
Download