INSYS EBW-H100 Router Firmware 2.12.8
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: Update_EBW_2128_Monitoring_240.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Functional Enhancements:
– Web interface: New host name (appstart) for direct access to the Monitoring App (default: appstart.local)
– Web interface: Microsoft Edge browser support
– Firewall: Selective release of UDP port 4500 for NAT traversal in modes “activate” or “force”
Further Improvements:
– MoRoS Modem: Stability for Dial-In and Dial-Out connections with access to LAN devices-optimised
– Redundant WAN: Changeover optimised and link loss detection for LAN(ext) now also with device start
– EBW-L: VPN connection establishment with device restart optimised
– Messages: Detection of link loss and link up at LAN(ext) corrected (applies to MoRoS only)
– Sandbox: optimised memory handling for MoRoS and IMON
– Inputs: Pulse detection for MoRoS optimised
– MoRoS: accelerated initialisation of switch and external modem (RS232 port) with device restart
– ASCII configuration: Parameters “username” and “password” for OpenVPN client without “CR/LF” with download
– ASCII configuration: Parameter “direction” amended for WWAN firewall rules (applies to EBW-L100 only)
– ASCII configuration: Parameter “apply” for port forwarding rules effective for all entries
Anotações importantes:
– If your device has a previous firmware version of at least 1.x.x this update cannot be used!
– If your device has a previous firmware version of at least 2.0.0 but before 2.3.0, an intermediate update step to 2.2.1, and then an intermediate update step to 2.6.2 must be performed before.
– If your device has a previous firmware version of at least 2.3.0 but before 2.6.0, an intermediate update step to 2.6.2 must be performed before.
Preconditions:
– Make sure nobody else is working on the web interface too!
– The power supply must not fail or be switched off in any case!
– We recommend to save the configuration first.
Download