Gigabyte W480 VISION W (rev. 1.0) Intel Serial IO Driver 30.100.1947.3 para Windows 10 64-bit
Tipo de arquivo: Driver.
Sistema operacional: Windows 10.
Nome do arquivo: mb_driver_614_serialio_30.100.1947.3.zip.
Bit: 64 Bit.
Licença: Grátis.
Descrição
Características principais:
– Powerful performance with Intel Xeon W processors and support 10th Gen Intel Core series processors
– Reliability ensuring by DDR4 ECC & Non-ECC memory with 4 physical DIMM slots
– Multi-graphics configurations offer better graphics performance
– Fully Quadro QVL Tested
– High-bandwidth and low-latency network support by Intel 2.5GbE + GbE Dual LAN with cFosSpeed
– Intel vPro technology provides the enterprise-grade security
– Effective cooling solution design for the better thermal dissipation
– Smart Fan 5 features hybrid fan headers and numerous temperature sensors to configure fan mode
– Dual Ultra-Fast M.2 with PCIe Gen3 x4 interface
– 10 SATA3 ports support for large storage capacity
– Comprehensive connectivity with USB 3.2 Gen2 Type-C Header
– Supports up to three monitor displays simultaneously
– Commercial features with dual COM port headers, HDDs monitor by SGPIO, and PSU status by PMBus
– Q-Flash Plus Updates BIOS without Installing the CPU, Memory and Graphics Card
Este pacote contém os arquivos necessários para instalar o driver Intel Serial IO. Se tiver sido instalado, a atualização (sobrescrever-instalar) poderá corrigir problemas, adicionar novas funções ou expandir as já existentes. Mesmo que outros SOs também sejam compatíveis, não recomendamos aplicar este release em plataformas diferentes das especificadas.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
Download