Gigabyte GA-X79S-UP5-WIFI (rev. 1.0) Easy Tune6 Utilitário B12.0801.1 para Intel
Tipo de arquivo: Utilitário.
Sistema operacional: Windows 7, Windows Vista, Windows XP.
Nome do arquivo: motherboard_utility_et6_intel.exe.
Bit: 64 Bit.
Licença: Grátis.
Descrição
CPU
– Suporte para Intel Core i7 processors in the LGA2011 package
– L3 cache varies with CPU
Chipset
– Intel C606 Express Chipset
Memory
– 8 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
– 4 channel memory architecture
– Suporte para DDR3 2133/1866/1600/1333/1066 MHz memory modules
– Suporte para ECC memory modules
– Suporte para Extreme Memory Profile (XMP) memory modules
Audio
– Realtek ALC898 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Suporte para S/PDIF Out
LAN
– 1 x Intel GbE LAN chip (10/100/1000 Mbit) (LAN1)
– 1 x Realtek GbE LAN chip (10/100/1000 Mbit) (LAN2)
Expansion Slots
– 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
– 1 x PCI Express x16 slot, running at x8 (PCIEX8)
* The PCIEX8 slot shares bandwidth with the PCIEX16_2 slot. When the PCIEX8 slot is populated, the PCIEX16_2 slot will operate at up to x8 mode.
– 1 x PCI Express x16 slot, running at x4 (PCIEX4)
(The PCIEX16, PCIEX8, and PCIEX4 slots conform to PCI Express 3.0 standard.)
– 1 x PCI Express x1 slot
(The PCIEX1 slot conforms to PCI Express 2.0 standard.)
– 1 x PCI slot
Multi-Graphics Technology
– Suporte para 3-Way/2-Way AMD CrossFireX/NVIDIA SLI technology
Storage Interface Chipset:
– 2 x SATA 6Gb/s connectors (SATA3 0~1) supporting up to 2 SATA 6Gb/s devices
– 4 x SATA 3Gb/s connectors (SATA2 2~5) supporting up to 4 SATA 3Gb/s devices
– Suporte para RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
– 8 x SAS 3Gb/s connectors (SAS2 0~7) supporting up to 8 SAS 3Gb/s devices
* The SAS connectors do not support optical drives.
– Suporte para RAID 0, RAID 1, and RAID 10
Marvell 88SE9172 chip:
– 2 x eSATA 6Gb/s connectors (including 1 eSATA/USB Combo) on the back panel supporting up to 2 SATA 6Gb/s devices
– Suporte para RAID 0 and RAID 1
USB Chipset:
– Up to 12 USB 2.0/1.1 ports (6 ports on the back panel, including 1 eSATA/USB Combo, 6 ports available through the internal USB headers)
VIA VL800 chip:
– Up to 4 USB 3.0/2.0 ports on the back panel
* Due to a Windows 7 limitation, please connect your USB device(s) to the USB 2.0/1.1 port(s) before the VIA USB 3.0 controller driver is installed.
Fresco FL1009 chip:
– Up to 2 USB 3.0/2.0 ports (available through the internal USB header)
IEEE 1394
VIA VT6308 chip:
– Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through the internal IEEE 1394a header)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 2 x SATA 6Gb/s connectors
– 4 x SATA 3Gb/s connectors
– 8 x SAS 3Gb/s connectors
– 1 x CPU fan header
– 4 x system fan headers
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 1 x USB 3.0/2.0 header
– 3 x USB 2.0/1.1 headers
– 1 x IEEE 1394a port
– 1 x Clear CMOS jumper
– 1 x Trusted Platform Module (TPM) header
– 1 x power button
– 1 x reset button
Back Panel Connectors
– 1 x PS/2 keyboard/mouse port
– 1 x CPU overclocking button
– 1 x BIOS switch button
– 1 x Clear CMOS button
– 1 x IEEE 1394a port
– 4 x USB 3.0/2.0 ports
– 5 x USB 2.0/1.1 ports
– 1 x eSATA/USB Combo connector
– 1 x eSATA 6Gb/s connector
– 2 x RJ-45 ports
– 1 x optical S/PDIF Out connector
– 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
I/O Controller
– iTE I/O Controller Chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
– 2 x 64 Mbit flash
– Use of licensed AMI EFI BIOS
– Suporte para DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Unique Features
– Suporte para @BIOS
– Suporte para Q-Flash
– Suporte para Xpress Install
– Suporte para EasyTune
* Available functions in EasyTune may differ by motherboard model.
– Suporte para ON/OFF Charge
– Suporte para 3TB+ Unlock
– Suporte para Q-Share
– Suporte para 3D Power
Bundle Software
– Norton Internet Security (OEM version)
Form Factor
– E-ATX Form Factor; 30.5cm x 26.4cm
É altamente recomendável usar sempre a versão de driver mais recente disponível.
Não se esqueça de verificar com nosso site o mais rápido possível para ficar atualizado sobre os drivers, softwares e jogos mais recentes.
Tente definir um ponto de restauração do sistema antes de instalar um driver de dispositivo. Isso ajudará se você instalou um driver errado. Podem surgir problemas quando o dispositivo de hardware é muito antigo ou não é mais suportado.
Download