Gigabyte GA-X79-UD7 (rev. 1.0) Fresco USB 3.0 Driver 3.3.35.0
Tipo de arquivo: Driver.
Sistema operacional: Windows 7, Windows Vista, Windows XP.
Nome do arquivo: mb_driver_fresco_usb3.exe.
Bit: 64 Bit.
Licença: Grátis.
Descrição
CPU
– Suporte para Intel Core i7 processors in the LGA2011 package
– L3 cache varies with CPU
Chipset
– Intel X79 Express Chipset
Memory
– 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
– 4 channel memory architecture
– Suporte para DDR3 2133/1866/1600/1333/1066 MHz memory modules
– Suporte para non-ECC memory modules
– Suporte para Extreme Memory Profile (XMP) memory modules
Audio
– Realtek ALC898 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Suporte para Dolby Home Theater
– Suporte para S/PDIF Out
LAN
– 1 x Intel GbE LAN (10/100/1000 Mbit)
Expansion Slots
– 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
– 2 x PCI Express x16 slot, running at x8 (PCIEX8_1, PCIEX8_2)
* The PCIEX8_2 slot shares bandwidth with the PCIEX16_2 slot. When the PCIEX8_2 slot is populated, the PCIEX16_2 slot will operate at up to x8 mode.
– (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
– 3 x PCI Express x1 slots
Multi-Graphics Technology
– Suporte para 4-Way/3-Way/2-Way AMD CrossFireX/NVIDIA SLI technology
– The PCIEX16 slots operate at up to x8 mode when 4-Way/3-Way AMD CrossFireX/NVIDIA SLI is enabled.
Storage Interface Chipset:
– 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices
– 4 x SATA 3Gb/s connectors (SATA2 2/3/4/5) supporting up to 4 SATA 3Gb/s devices
– Suporte para RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
2 x Marvell 88SE9172 chips:
– 4 x SATA 6Gb/s connectors (GSATA3 6/7/8/9) supporting up to 4 SATA 6Gb/s devices
– Suporte para SATA RAID 0 and RAID 1
USB Chipset:
– Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers)
2 x Fresco FL1009 chips:
– Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 2 x 8-pin ATX 12V power connectors
– 2 x PCIe power connectors
– 6 x SATA 6Gb/s connectors
– 4 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 6 x system fan headers
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 3 x USB 2.0/1.1 headers
– 1 x USB 3.0/2.0 header
– 1 x Clear CMOS jumper
– 1 x power button
– 1 x reset button
– 1 x onboard voltage measurement module
– 1 x Gear button
– 1 x CPU BCLK Down button
– 1 x CPU BCLK Up button
– 1 x CPU Ratio Down button
– 1 x CPU Ratio Up button
– 1 x Trusted Platform Module (TPM) header
Back Panel Connectors
– 1 x PS/2 keyboard/mouse port
– 1 x CPU overclocking button
– 1 x BIOS switch button
– 1 x Clear CMOS button
– 8 x USB 2.0/1.1 ports
– 2 x USB 3.0/2.0 ports
– 1 x RJ-45 port
– 1 x optical S/PDIF Out connector
– 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Mic In, Line Out)
I/O Controller
– iTE IT8728 chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
– 2 x 64 Mbit flash
– Use of licensed AMI EFI BIOS
– Suporte para DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Unique Features
– Suporte para @BIOS
– Suporte para Q-Flash
– Suporte para Xpress BIOS Rescue
– Suporte para Download Center
– Suporte para Xpress Install
– Suporte para Xpress Recovery2
– Suporte para EasyTune
* Available functions in EasyTune may differ by motherboard model.
– Suporte para Smart 6
– Suporte para eXtreme Hard Drive (X.H.D)
– Suporte para ON/OFF Charge
– Suporte para Cloud OC
– Suporte para 3TB+ Unlock
– Suporte para TouchBIOS
– Suporte para Q-Share
Bundle Software
– Norton Internet Security (OEM version)
Form Factor
– XL-ATX Form Factor; 32.4cm x 25.3cm
É altamente recomendável usar sempre a versão de driver mais recente disponível.
Não se esqueça de verificar com nosso site o mais rápido possível para ficar atualizado sobre os drivers, softwares e jogos mais recentes.
Tente definir um ponto de restauração do sistema antes de instalar um driver de dispositivo. Isso ajudará se você instalou um driver errado. Podem surgir problemas quando o dispositivo de hardware é muito antigo ou não é mais suportado.
Download