Gigabyte GA-H61MA-D3V (rev. 2.1) Marvell SATA Controller Driver 1.2.0.1010
Tipo de arquivo: Driver.
Sistema operacional: Windows 7, Windows Vista, Windows XP.
Nome do arquivo: mb_driver_marvell_sata_controller.exe.
Bit: 64 Bit.
Licença: Grátis.
Descrição
CPU
– Suporte para Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package
– L3 cache varies with CPU
Chipset
– Intel H61 Express Chipset
Memory
– 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
– Dual channel memory architecture
– Suporte para DDR3 1333/1066/800 MHz memory modules
– Suporte para non-ECC memory modules
– Suporte para Extreme Memory Profile (XMP) memory modules
* To support XMP memory, you must install an Intel 22nm (Ivy Bridge) CPU.
Onboard Graphics
Integrated Graphics Processor:
– 1 x D-Sub port
– 1 x DVI-D port, supporting a maximum resolution of 1920×1200
* The DVI-D port does not support D-Sub connection by adapter.
Audio
– Realtek ALC887 audio codec
– High Definition Audio
– 2/4/5.1/7.1-channel
* To enable 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
LAN
– 1 x Realtek 8111E/8111F chip (10/100/1000 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
* To support PCI Express 3.0, you must install an Intel 22nm CPU.
– 3 x PCI Express x1 slots
(The PCI Express x1 slots conform to PCI Express 2.0 standard.)
Storage Interface Chipset:
– 4 x SATA 3Gb/s connectors (SATA2 0/1/2/3) supporting up to 4 SATA 3Gb/s devices
Marvell 88SE9172 chip:
– 2 x SATA 6Gb/s connectors (GSATA3 0/1) supporting up to 2 SATA 6Gb/s devices
– Suporte para RAID 0 and RAID 1
USB Chipset:
– Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Etron EJ168 chip:
– Up to 2 USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 4-pin ATX 12V power connector
– 4 x SATA 3Gb/s connectors
– 2 x SATA 6Gb/s connectors
– 1 x CPU fan header
– 1 x system fan header
– 1 x front panel header
– 1 x front panel audio header
– 2 x USB 2.0/1.1 headers
– 1 x Clear CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard/mouse port
– 1 x D-Sub port
– 1 x DVI-D port
– 4 x USB 2.0/1.1 ports
– 2 x USB 3.0/2.0 ports
– 1 x RJ-45 port
– 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller
– iTE I/O controller chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
– 2 x 32 Mbit flash
– Use of licensed AMI EFI BIOS
– Suporte para DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Bundle Software
– Norton Internet Security (OEM version)
Unique Features
– Suporte para @BIOS
– Suporte para Q-Flash
– Suporte para Xpress Recovery2
– Suporte para EasyTune
* Available functions in EasyTune may differ by motherboard model.
– Suporte para ON/OFF Charge
Form Factor
– Micro ATX Form Factor; 24.4cm x 17.4cm
É altamente recomendável usar sempre a versão de driver mais recente disponível.
Não se esqueça de verificar com nosso site o mais rápido possível para ficar atualizado sobre os drivers, softwares e jogos mais recentes.
Tente definir um ponto de restauração do sistema antes de instalar um driver de dispositivo. Isso ajudará se você instalou um driver errado. Podem surgir problemas quando o dispositivo de hardware é muito antigo ou não é mais suportado.
Download