Gigabyte G1.Sniper 3 (rev. 1.0) Intel SATA AHCI/ RAID Preinstall Driver 11.0.0.1032 x64
Tipo de arquivo: Driver.
Sistema operacional: Windows 7, Windows XP.
Nome do arquivo: mb_driver_intel_bootdisk_irst_64_7series.exe.
Bit: 64 Bit.
Licença: Grátis.
Descrição
Specifications:
CPU
– Suporte para Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package
– L3 cache varies with CPU
Chipset
– Intel Z77 Express Chipset
Memory
– 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
– Dual channel memory architecture
– Suporte para DDR3 1600/1333/1066 MHz memory modules
– Suporte para non-ECC memory modules
– Suporte para Extreme Memory Profile (XMP) memory modules
Onboard Graphics
Integrated Graphics Processor:
– 1 x D-Sub port
– 1 x DVI-D port, supporting a maximum resolution of 1920×1200
* The DVI-D port does not support D-Sub connection by adapter.
– 1 x HDMI port, supporting a maximum resolution of 1920×1200
– 1 x DisplayPort, supporting a maximum resolution of 2560×1600
Audio
– Creative CA0132 chip
– Suporte para Sound Blaster Recon3Di
– High Definition Audio
– 2/5.1-channel
– Suporte para S/PDIF Out
LAN
– 1 x Qualcomm Atheros Killer E2201 LAN chip (10/100/1000 Mbit) (LAN1)
– 1 x Intel GbE LAN phy (10/100/1000 Mbit) (LAN2)
* Teaming is not supported.
Expansion Slots
– 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
– 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
* The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2 slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode when the PCIEX8_1/PCIEX8_2 is populated.
(The PCI Express x16 slots conform to PCI Express 3.0 standard.)
* To support PCI Express 3.0, you must install an Intel 22nm CPU.
– 2 x PCI Express x1 slots
(The PCI Express x1 slots conform to PCI Express 2.0 standard.)
– 1 x PCI slot
Multi-Graphics Technology
– Suporte para 4-Way/3-Way/2-Way AMD CrossFireX/NVIDIA SLI technology
* The PCIEX16 slots operate at up to x8 mode when 4-Way/3-Way AMD CrossFireX/NVIDIA SLI is enabled.
Storage Interface Chipset:
– 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices
– 4 x SATA 3Gb/s connectors (SATA2 2/3/4/5) supporting up to 4 SATA 3Gb/s devices
– 1 x mSATA connector
* The SATA2 5 connector will become unavailable when the mSATA connector is installed with a solid state drive.
– Suporte para RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
2 x Marvell 88SE9172 chips:
– 4 x SATA 6Gb/s connectors (GSATA3 6/7/8/9) supporting up to 4 SATA 6Gb/s devices
– Suporte para RAID 0 and RAID 1
USB Chipset:
– Up to 2 USB 3.0/2.0 ports on the back panel
– Up to 4 USB 2.0/1.1 ports (available through the internal USB headers)
Chipset + 2 VIA VL810 Hubs:
– Up to 8 USB 3.0/2.0 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
IEEE 1394
VIA VT6308 chip:
– Up to 2 IEEE 1394a ports (available through the internal IEEE 1394a headers)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 1 x PCIe power connector
– 6 x SATA 6Gb/s connectors
– 4 x SATA 3Gb/s connectors
– 1 x mSATA connector
– 1 x CPU fan header
– 4 x system fan headers
– 1 x front panel header
– 1 x front panel audio header
– 2 x USB 2.0/1.1 headers
– 2 x USB 3.0/2.0 headers
– 2 x IEEE 1394a headers
– 1 x Clear CMOS jumper
– 1 x power button
– 1 x Clear CMOS button
– 1 x reset button
– Voltage measurement points
– 1 x BIOS switch
– 1 x Trusted Platform Module (TPM) header
Back Panel Connectors
– 1 x PS/2 keyboard/mouse port
– 6 x USB 3.0/2.0 ports
– 1 x D-Sub port
– 1 x DVI-D port
– 1 x HDMI port
– 1 x DisplayPort
– 2 x RJ-45 ports
– 1 x optical S/PDIF Out connector
– 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic In, Line Out, Headphone)
I/O Controller
– iTE I/O Controller Chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control
– * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
– 2 x 64 Mbit flash
– Use of licensed AMI EFI BIOS
– Suporte para DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Unique Features
– Suporte para @BIOS
– Suporte para Q-Flash
– Suporte para Xpress Install
– Suporte para Xpress Recovery2
– Suporte para EasyTune
* Available functions in EasyTune may differ by motherboard model.
– Suporte para eXtreme Hard Drive (X.H.D)
– Suporte para Auto Green
– Suporte para ON/OFF Charge
– Suporte para Q-Share
– Suporte para 3D Power
– Suporte para EZ Setup
Bundle Software
– Norton Internet Security (OEM version)
– Intel Rapid Start Technology
– Intel Smart Connect Technology
– Intel Smart Response Technology
– LucidLogix Virtu MVP
* Make sure the monitor cable has been connected to the integrated graphics port(s) on the back panel.
Form Factor
– XL-ATX Form Factor; 30.5cm x 26.4cm
Download