Xwrt-Vortex Oprogramowanie 380.63.2 do Linksys EA6900
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: EA6900_380.63_2.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Xwrt-Vortex is a port of Asuswrt-Merlin for different routers developed by Vortex. Xwrt-Vortex retains all the features of the original stock Asus firmware.
Installation:
Simply flash it like any regular update. Nie musisz przywracać ustawień fabrycznych. You can revert back to an original Asus firmware at any time just by flashing a firmware downloaded from Asus’s website.
UWAGA:
resetting to factory default after flashing is strongly recommended for the following cases:
– Updating from a firmware version that is more than 3 releases older
– Switching from a Tomato/DD-WRT/OpenWRT firmware
If upgrading from anything older and you experience issues, then consider doing a factory default reset then as well. Always read the changelog, as mandatory resets will be mentioned there when they are necessary.
In all of these cases, do NOT load a saved copy of your settings! This would be the same thing as NOT resetting at all, as you will simply re-enter any invalid setting you wanted to get rid of. Make sure to create a new backup of your settings after reconfiguring.
Zmiany:
– CHANGED: Added detection for iPhone 7 models in networkmap (patch by Andrei Coman).
– CHANGED: Enabled –dns-loop-detect support in dnsmasq
– CHANGED: Move Dual WAN static routes to a lower priority, so VPN policy rules will have priority over them
– FIXED: Traditional QoS labels were off by one on the Stats page.
– FIXED: Adaptive QoS upload stats couldn’t be retrieved because qosd seems to be hardcoded to always set up classes on eth0 rather than on the real WAN interface.
– FIXED: USB driver was removed too early at shutdown time on the RT-AC56U and RT-AC87U (fix by john9527)
Uwagi dotyczące instalacji:
– To niestandardowe oprogramowanie układowe można zastosować jak każdą regularną aktualizację.
– Nie musisz przywracać ustawień fabrycznych.
– W dowolnym momencie możesz powrócić do oryginalnego oprogramowania układowego ASUS.
– Nie ładuj zapisanej kopii ustawień.
Pobierz