WD Universal Firmware Update Narzędzie 3.2.0.8D
Typ pliku: Narzędzie.
System Operacyjny: AnyOS, Windows 10, Windows 7, Windows 8.
Nazwa pliku: WDFirmwareUpdater.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
WD Universal FW Updater 3.2.0.8D:
– Fixed compatibility issues with some USB 3.0 hosts where the drive would occasionally disconnect and reconnect to the host, caused by the USB 3.0 link power management.
– Fixed drive occasionally failing to re-enumerate after a system warm reboot.
Firmware 1.042:
– Fixed compatibility issues with some USB 3.0 hosts where the drive would occasionally disconnect and reconnect to the host.
Firmware 1.035:
– Initial Release
Compatibility with the following drives with a P/N that ends with -04:
– My Book Essential (USB 3.0 and USB 2.0)
– My Book for Mac (USB 3.0 and USB 2.0)
– WD Element
– My Passport
– My Passport Edge
– My Passport Edge for Mac
– My Passport Ultra
– My Passport Air
Firmware 1.016:
– This firmware update fixes the drive’s handling of infrequent ECC errors which can cause data access issues.
Compatibility with the following drives with a P/N that ends with -00:
– My Book Essential (USB 3.0 and USB 2.0)
– My Passport Essential (USB 3.0 and USB 2.0)
– My Passport Essential SE (USB 3.0 and USB 2.0)
Firmware 1.022:
– Resolved issue of drive not enumerating after system resume from sleep on USB 3.0
Firmware 1.019:
– Fixed the Windows 8 Hardware Certification Kit USB 3.0 suspend test.
Firmware 1.015:
– Fixed USB 3.0 enumeration issue with new Intel Chipset.
Compatibility with the following drives with a P/N that ends with -01:
– My Book Essential (USB 3.0 and USB 2.0)
– My Book Studio (USB 3.0 and USB 2.0)
– My Book for Mac (USB 3.0 and USB 2.0)
– My Passport (USB 3.0 and USB 2.0)
– My Passport for Mac (USB 3.0 and USB 2.0)
– My Passport Essential (USB 3.0 and USB 2.0)
– My Passport Essential SE (USB 3.0 and USB 2.0)
– My Passport
– My Passport Ultra
– My Passport Edge
– My Passport Enterprise
– WD Elements SE Portable
Firmware 2.018/2.019:
– This firmware version includes support for Mac OS-X Tiger.
Compatibility:
– My BookEssential (+ WD SmartWare)
– My Book for Mac (+ WD SmartWare)
– My Book Elite (+ WD SmartWare)
– My Passport Essential (+ WD SmartWare)
– My Passport Essential SE (+ WD SmartWare)
– My Passport for Mac (+ WD SmartWare)
– My Passport SE for Mac (+ WD SmartWare)
– My Passport Elite (+ WD SmartWare)
– My Passport
Firmware 1.012:
– Works better with some operating systems and disk utilities with regards to data cluster alignment on the disk.
Compatibility:
– My Book Studio (+ WD SmartWare)
– My Passport Studio (+ WD SmartWare)
Firmware 1.014:
– Initial Release
Compatibility:
– My Passport Studio LX (+ WD SmartWare)
Firmware 1.041:
– Initial Release
Compatibility:
– My Passport Studio
Firmware 1.049:
– VCD device does not always mount when connected via Firewire on Mac.
Firmware 1.020:
– Initial Release
Compatibility:
– My Book Studio (+ WD SmartWare) without the Electronic Paper Display
Firmware 1.017:
– Initial Release
Compatibility:
– Studio Edition II
Firmware 1.049:
– Fixed drive occasionally failing to re-enumerate after a system warm reboot.
Firmware 1.042:
– Now works with My Passport Ultra and My Passport Air.
Firmware 1.033:
– Corrected drive sensing on certain drive models.
Firmware 1.030:
– Initial Release
Compatibility with the following drives with a P/N that ends with -03:
– My Passport
– My Passport Edge
– My Passport Edge for Mac
– My Passport Ultra
– My Passport Air
– WD Elements SE Portable
IMPORTANT:
– Before updating the firmware on your drive, make sure you have a copy of all the data on your drive stored on a separate device.
– An available USB port on your computer is required. Your drive MUST be connected to your computer through the USB port to update the firmware.
– If you are using a laptop, please make sure the battery is sufficiently charged.
– During the firmware update, DO NOT disconnect or disrupt the power to the drive.
– All AntiVirus software MUST be disabled.
– All Anti-Spyware software MUST be disabled.
– ANY and ALL programs that would require drive access during the update MUST be disabled.
– An internet connection is required to install the firmware update.
Pobierz