TRENDnet TEW-815DAP v1.0 Access Point Oprogramowanie 1.0.2.0
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: TEW-815DAPv1_(FW1.0.2.0).zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Firmware Upgrade Procedures:
1. Save the downloaded firmware file to your PC
2. Right click on the downloaded file and select Extract All or Extract Here option a. Make sure to remember the location where the extracted file will be saved.
3. Log into to the access point’s configuration page
4. Click on the Administrator section and click on Upload Firmware.
5. Depending on your web browser, in the Upload Firmware section, click Browse or Choose File.
6. Navigate to the folder on your computer where the unzipped firmware file (.bin) is located and select it.
7. Click Apply. If prompted, click Yes or OK. Wait until the firmware upload completed and the device reboots.
8. The firmware upgrade process is completed.
9. To finalize the firmware update process you must reset the TEW-815DAP to factory default settings. Click the Load Default button located on the Administrator > Settings Management page.
Pobierz