Pioneer DJM-450 Mixer Oprogramowanie 1.03
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: djm-450_v103.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Zmiany:
– IMPROVED: Cut lag length changed for more responsive scratch performance.
– IMPROVED: Selected channel is shown on the display when switching the effect channel.
– FIXED: Popping noise occurred in USB audio (FX SEND/RETURN) when switching FX assign on rekordbox with BEAT FX enabled.
– FIXED: Fixed other minor issues.
Update Procedures:
1. How to enter the Update mode. Turn on the power while pressing both [ON/OFF (BEAT FX)] and [MID (FX FREQUENCY)] buttons.
– Please disconnect all devices and cables from USB, LINK and INTERNET terminals.
2. Check the current version of your firmware on the display. If current version is displayed as “xxx”, you do not need the update process because it is the latest firmware.
3. Insert the USB flash drive containing the firmware files into the USB port. The update process will begin and the progress bar and percentage will be displayed on the screen.
– Do not turn the power off or disconnect the USB flash drive during the update.
– The update will be completed in approximately 9 minutes.
4. When the message [COMPLETE] appears, the update is completed. Please turn the power off and disconnect the USB flash drive.
If the firmware update will not start or an error occurred during the firmware update, the downloaded file might be broken. Please download the firmware again. If you still unable to complete the update, it could be due to the compatibility with your USB device. Please try a different USB device.
Pobierz