OCZ SSD Narzędzie 2.0.2430 do Mac OS
Typ pliku: Narzędzie.
System Operacyjny: AnyOS, Mac.
Nazwa pliku: Bootable_SSDUtility_v2.0.2430.dmg.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
This is a major release of SSD Utility, which replaces the SSD Guru and SSD AccessPro products.
These are the primary new features since SSD Guru/AccessPro V1.5:
– SSD Utility is now copyright Toshiba Corporation.
– Introduces support for TR150, RD400, VT180 and ZD6000 family.
– Supports updating of device drivers.
– Supports self-update of SSD Utility to future versions.
– Provides alerts on potential SSD issues.
– Management of notifications now supported in Settings.
– Benchmark option available under Tuner.
– Displays firmware, BIOS and driver release notes.
– Multiple languages now supported in the user interface.
– Can update firmware and BIOS on multiple drives together.
– Automatically downloads Bootable SSD Utility image when creating.
– Explicit control provided on shutting down or restarting system after an update.
– NVMe Format option provides a quick “secure erase” option for RD400.
– Manual Trim function has been removed, as Windows 7 and above supports Trim natively. Manual Trim function remains in Linux version of SSD Utility.
– Any SSD used as the system drive is highlighted.
– Will no longer allow firmware update to be attempted when not in AHCI mode for SATA SSDs.
– Over provisioning enhancements with spanned disks and multiple namespaces.
– Many minor enhancements.
Compatible Products:
– ARC 100
– Trion 100/150
– TR150
– Radeon R7
– Vector
– Vector 150/180
– VT180
– Vertex 450/460/460A
– RevoDrive 3/3×2
– RevoDrive 350
– and RD400/400A
Compatible Enterprise Products:
– Deneva 2
– Saber 1000
– Intrepid 3600/3700/3800
– Z-Drive 4500
– Z-Drive 6000/6300
– ZD6000/6300
Known Issues:
– Task tray icon may not appear correctly positioned and sized in some Linux window managers.
Aby zainstalować ten pakiet, wykonaj następujące czynności:
– Upewnij się, że spełnione są wszystkie wymagania systemowe.
– Zapisz pakiet do pobrania w dostępnej lokalizacji (np. Na pulpicie).
– Zlokalizuj i kliknij dwukrotnie nowo pobrany plik.
– Zezwól systemowi Windows na uruchomienie pliku (jeśli to konieczne).
– Przeczytaj Umowę licencyjną użytkownika końcowego (Umowa licencyjna użytkownika końcowego) i zgódź się kontynuować proces instalacji.
– Postępuj zgodnie z instrukcjami wyświetlanymi na ekranie.
– Zamknij kreatora i ponownie uruchom system, aby zmiany odniosły skutek.
Pobierz