Nikon Z 5 Camera Oprogramowanie 1.02 do macOS
Typ pliku: Oprogramowanie.
System Operacyjny: Mac.
Nazwa pliku: F-Z5-V102M.dmg.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Zmiany:
– Added support for NIKKOR Z 50mm f/1.2 S lenses.
– Fixed an issue that resulted in certain aperture values not being selected when control rings for the following lenses were rotated to stop aperture down in movie mode: NIKKOR Z 24–50mm f/4–6.3, NIKKOR Z 24–200mm f/4–6.3 VR, NIKKOR Z DX 16–50mm f/3.5–6.3 VR, NIKKOR Z DX 50–250mm f/4.5–6.3 VR
– Fixed an issue that prevented the TTL flash compensation value selected with the camera being reflected by the flash units, resulting in flash compensation not being applied, when: two or more flash units were controlled via radio AWL, and all flash units were in the same group.
Wyświetlanie wersji oprogramowania aparatu:
– Włącz aparat.
– Naciśnij przycisk MENU aparatu i wybierz Wersja oprogramowania w MENU USTAWIEŃ, aby wyświetlić wersję oprogramowania aparatu.
– Sprawdź wersję oprogramowania aparatu.
– Wyłącz aparat.
Aktualizacja oprogramowania sprzętowego kamery:
– Utwórz folder na dysku twardym komputera i nadaj mu nazwę zgodnie z potrzebami.
– Download the file to the folder newly-created.
– Extract the file to a folder named “Z6Update”
– Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
– Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
– Insert the memory card into the camera and turn the camera on.
– Wybierz wersję oprogramowania układowego w MENU KONFIGURACJI i postępuj zgodnie z instrukcjami wyświetlanymi na ekranie, aby zakończyć aktualizację oprogramowania układowego.
– Po zakończeniu aktualizacji wyłącz aparat i wyjmij kartę pamięci.
– Sprawdź, czy oprogramowanie zostało zaktualizowane do nowej wersji.
Pobierz