Nikon D5500 Camera Oprogramowanie 1.02
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista.
Nazwa pliku: F-D5500-V102W.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
Zmiany:
– The camera would stop responding if the multi selector was pressed right with Add items > CUSTOM SETTING MENU > c Timers/AE lock selected in MY MENU.
– The shutter would sometimes not be released in response to live view touch shutter controls if autofocus was used with an SB-800 flash unit attached.
– Optimal exposure would sometimes not be achieved in photographs taken during live view with lenses that support both autofocus and electronic aperture control (type E lenses).
– If image review was enabled during viewfinder photography, the camera would sometimes display shooting information in place of the most recent picture when the user removed their eye from the viewfinder after shooting.
– The camera would sometimes fail to store the option selected for a Autofocus > a3 Built-in AF-assist illuminator in the CUSTOM SETTING MENU after the mode dial was rotated to another setting.
Uwaga:
– Once this firmware is installed, the Windows edition of Camera Control Pro 2 versions 2.22.0 and earlier will no longer be able to detect the camera. Upgrade to Camera Control Pro 2.23.0 or later.
The following issues have been addressed:
– Noise would occur at four-second intervals in audio output to external recorders connected via HDMI in movie live view.
– Choosing negative values for Exposure compensation in the RETOUCH MENU > NEF (RAW) processing display did not have the desired effect.
– Selecting ON for Exposure smoothing during interval timer photography would result in all shots after the first being overexposed.
Wyświetlanie wersji oprogramowania aparatu:
– Włącz aparat.
– Naciśnij przycisk MENU aparatu i wybierz Wersja oprogramowania w MENU USTAWIEŃ, aby wyświetlić wersję oprogramowania aparatu.
– Sprawdź wersję oprogramowania aparatu.
– Wyłącz aparat.
Aktualizacja oprogramowania sprzętowego kamery:
– Utwórz folder na dysku twardym komputera i nadaj mu nazwę zgodnie z potrzebami.
– Pobierz oprogramowanie sprzętowe file to the folder created.
– Run it to extract the firmware file.
– Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.
– Insert the memory card into the camera memory card slot and turn the camera on.
– Wybierz wersję oprogramowania układowego w MENU KONFIGURACJI i postępuj zgodnie z instrukcjami wyświetlanymi na ekranie, aby zakończyć aktualizację oprogramowania układowego.
– Po zakończeniu aktualizacji wyłącz aparat i wyjmij kartę pamięci.
– Sprawdź, czy oprogramowanie zostało zaktualizowane do nowej wersji.
Pobierz