Nikon D500 Camera Oprogramowanie 1.30
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 10, Windows 7, Windows 8, Windows 8.1.
Nazwa pliku: F-D500-V130W.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
Naprawiono następujące problemy:
– Added supported for CFexpress cards (Type B). For more information, see the Nikon support website for your country or region.
– Fixed an issue that caused both the Entire frame and Background only options for Custom Setting e3 Exposure comp. for flash in the CUSTOM SETTING MENU to produce the same results as Entire frame during flash photography.
Updating from “C” Firmware Versions 1.00 through 1.12 to Version 1.20
– You will need to perform the update twice. Performing the update for a second time completes the firmware update.
– During the first update, the camera may or may not display the message, “Update failed. Contact a Nikon-authorized service representative.” Continue with the second update regardless.
– Performing the Second Update: Complete Steps 5 through 7 of “Updating the Camera Firmware”.
– A Note on the Second Update: Note that the firmware version may or may not change as a result of the first update. If the firmware version has changed, the “Current” and “New” versions displayed in the “Update?” dialog will be the same; otherwise, the two versions will be different. In either case, the firmware version will be updated when you perform the update a second time.
– SnapBridge App Unable to Connect: If the SnapBridge app is unable to connect to the camera after the update, you may not have performed the second update. Select Connect to smart device in the camera SETUP MENU to display the app and camera name; if the Bluetooth icon does not flash in the display, you will need to perform the update again.
Wyświetlanie wersji oprogramowania aparatu:
– Włącz aparat.
– Naciśnij przycisk MENU aparatu i wybierz Wersja oprogramowania w MENU USTAWIEŃ, aby wyświetlić wersję oprogramowania aparatu.
– Sprawdź wersję oprogramowania aparatu.
– Wyłącz aparat.
Aktualizacja oprogramowania sprzętowego kamery:
– Utwórz folder na dysku twardym komputera i nadaj mu nazwę zgodnie z potrzebami.
– Zapisz plik do pobrania w nowo utworzonym folderze.
– Run the package to extract a .bin file (the camera firmware) to a folder named “D500Update”
– Za pomocą gniazda karty lub czytnika kart skopiuj plik .bin do kartę pamięci sformatowaną w aparacie.
– Włóż kartę pamięci do gniazda 1 w aparacie i włącz aparat.
– Wybierz wersję oprogramowania układowego w MENU KONFIGURACJI i postępuj zgodnie z instrukcjami wyświetlanymi na ekranie, aby zakończyć aktualizację oprogramowania układowego.
– Po zakończeniu aktualizacji wyłącz aparat i wyjmij kartę pamięci.
– Sprawdź, czy oprogramowanie zostało zaktualizowane do nowej wersji.
Pobierz