NETGEAR XSM4396K1 Switch Oprogramowanie 12.0.11.15
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: GSM_XSM4300_V12.0.11.15.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Bug Poprawki:
– Set the default MTU to 1500 bytes for routing interfaces.
– Add the multicast address 91:E0:F0:01:00:00 to the reserved multicast table.
– The user locks-out after a configured number of unsuccessful attempts.
– L3 multicast table is exhausted if the members join and leave the group rapidly when both L3/L3 multicast is configured.
– Clients with the MAC address that contains 70 in the second octet (xx-70-xx-xx-xx-xx) are dropped.
– The switch Green Ethernet LPI History web page doesn’t show advertisement or LPI event.
– The switch ARP table is not updated automatically when the Cisco firewall is connected.
– The switch is not turning the power LED to green after the bootup.
Enhancements:
– Display the PSU serial number in ‘show power’ command output.
Known Issues:
– A new GUI page is added in 12.0.11.x release under Routing > Multicast > Mroute Static-Multicast Configuration. This page doesn’t show up when the switch firmware is upgraded from 12.0.9.x to 12.0.11.x. Clear the browser cache to view this newly added page.
Pobierz