NETGEAR D7000 Router Oprogramowanie 1.0.1.78
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: D7000_FW_V1.0.1.78_1.0.1.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Security Poprawki:
– PSV-2018-0318 Weak Password Policy
– PSV-2019-0010 Cross-Site Scripting in “block site” Configuration
– PSV-2019-0012 /www/adv_index.htm Exposed Unauthenticated
– PSV-2019-0013 Cross-Site Scripting in /www/adv_index.htm
– PSV-2019-0014 Command Injection in PPPOE Functionality
– PSV-2019-0015 Cross-Site Scripting in “remote management” Configuration
– PSV-2019-0016/0018 Setup Actions Permitted Unauthenticated
– PSV-2019-0109 mini_httpd Authentication Bypass Vulnerability
– PSV-2019-0110/0184 Password Storage Information
– PSV-2019-0113 Password change & debug mode
– PSV-2019-0021 “Zombie POODLE” and “GOLDENDOODLE”
– PSV-2019-0022 Remote code execution
– PSV-2019-0192/0244 Remote code execution
– PSV-2019-0193/0245 Cross Site Scripting (XSS) in IPv6 Autoconfig settings
– PSV-2019-0170 Invalid CPE Certificate for Remote Access
– PSV-2019-0155 httpd lan_ipaddr stack overflow vulnerability
– PSV-2019-0145 httpd friendly_name stack overflow vulnerability
– PSV-2019-0124 NVRAM configuration injection caused by “SetNTP” parameter of SOAP “DeviceConfig-Set
– PSV-2019-0140 NVRAM configuration injection caused by “New5GCTSRTSThreshold” parameter of SOAP “WLANConfiguration-SetAdvancedW
– PSV-2019-0141 NVRAM configuration injection caused by “NewCTSRTSThreshold” parameter of SOAP “WLAN
To Install:
– Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
– Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
– Download and extract the new firmware to a convenient place such as your desktop.
– Log in to the router using a Web browser.
– Click ADVANCED tab > Administration > Firmware Upgrade.
– Click Browse and find the file you just downloaded.
– Click Upload. Do not interrupt the upgrade while the router does this step.
Ważna uwaga:
– The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.
– If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade. After firmware upgrade is done and boots up the system, it changes to steady amber color.
– Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it may result to a corrupt firmware and cause the device not to work.
Pobierz