MSI GS75 Stealth 8SF Intel Serial IO Sterownik 30.100.1841.2 do Windows 10 64-bit
Typ pliku: Sterownik.
System Operacyjny: Windows 10.
Nazwa pliku: tp_intel(r)_serialio_30.100.1841.2_30.100.1841.2_0xf43b69fd.zip.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
Kluczowe cechy:
– CPU: Up to 8th Gen. Intel Core i7 Processor
– Display: 17.3″ FHD (1920×1080), 144Hz, IPS-Level
– Chipset: Intel HM370
– Graphics: NVIDIA GeForce RTX 2070 With Max-Q Design, 8GB GDDR6
– Memory: DDR4-2666 Memory Type, 2 Slots Number of DIMM Slot, Max 32GB Max Capacity
– Storage: 1x M.2 SSD slot (SATA), 2x M.2 SSD Combo slot (NVMe PCIe Gen3 / SATA)
– Keyboard: Per-Key RGB Backlight Keyboard
– LAN: Killer Gb LAN
– Wireless & Bluetooth: 802.11 ac Wi-Fi + Bluetooth v5
– Webcam: HD type (30fps@720p)
Ten pakiet zawiera pliki potrzebne do instalacji sterownika Intel Serial IO. Jeśli został zainstalowany, aktualizacja (instalacja nadpisująca) może rozwiązać problemy, dodać nowe funkcje lub rozszerzyć istniejące. Nawet jeśli inne systemy operacyjne mogą być kompatybilne, nie zalecamy stosowania tej wersji na platformach innych niż określone.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
Pobierz