MikroTik RouterOS MMIPS Oprogramowanie 6.39 RC 12
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: routeros-mmips-6.39rc12.npk.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
What’s new in 6.39rc12
– quickset – configuration changes are now applied only on “OK” and “Apply” (not on mode change);
– winbox – minimal required version is v3.8 (because of new quickset);
– bridge – disallow manual removal of dynamic bridge ports;
– bridge – fixed access loss to device through bridge if master port had a loop (introduced in v6.38);
– bridge – fixed rare conflicts between hardware and software STP (introduced in v6.38);
– certificate – added year cap (invalid-after date will not exceed year 2039);
– certificate – allow CRL address to be specified as DNS name;
– certificate – fixed fail on import from CAPs when both key and name already exist;
– dhcpv6-server – fixed server removal crash if static binding was present;
– fan – improved RPM monitor on CCR1009;
– firewall – fixed import of exported configuration that had updated “limit” setting;
– graphs – fixed graph disappearance after power outage;
– ike1 – fixed ph1 rekey in setups with mode-cfg;
– ike2 – auto-negotiate split nets;
– ike2 – default to tunnel mode in setups without policy;
– ike2 – fixed initiator TS updating;
– ike2 – fixed policy setting for /0 selector with different address families;
– ike2 – fixed split policy active flag;
– ike2 – fixed xauth add check;
– ike2 – include identity in peer address info;
– ike2 – log empty TS payload;
– ike2 – minor logging update;
– ike2 – traffic selector improvements;
– ike2 – use first split net for empty TS;
– ike2 – use standard retransmission timers for DPD;
– ike2 – xauth like auth method with user support;
– ipsec – added ability to kill particular remote-peer;
– ipv6 – added warning about having interface MTU less than minimal IPv6 packet fragment (1280);
– leds – added LTE modem access technology trigger;
– leds – do not update single LED state when it is not changed;
– license – fixed demo license expiration after installation on x86;
– logs – work on false CPU/RAM overclocked alarms;
– mpls – fixed crash on active tunnel loss in MPLS TE setups;
– ppp – fixed rare kernel failure on PPP client connection;
– pppoe – make default keepalive 10s for PPPoE clients;
– profile – classify ethernet driver activity properly in ARM architecture;
– quickset – various small changes;
– rb751u – fixed ethernet LEDs (broken since 6.38rc16);
– tr069-client – added connection request authentication;
– tr069-client – added parameters for DNS client management support;
– tr069-client – generate random connection request target path;
– webfig – allow shorten bytes to k,M,G in firewall “connection-bytes” and “connection-rates”;
– webfig – show properly large BGP AS numbers;
– winbox – added “add-relay-info” and “relay-info-remote-id” to DHCP relay;
– winbox – added “group-key-update” to CAPsMAN security settings;
– winbox – added “make-static” to IPv6 DHCP server bindings;
– winbox – added “prefix-pool” to DHCPv6 server binding;
– winbox – added IPsec to radius services;
– winbox – added upstream flag to IGMP proxy interfaces;
– winbox – allow shorten bytes to k,M,G in bridge firewall just like in “/ip firewall”;
– winbox – allow shorten bytes to k,M,G in firewall “connection-bytes” and “connection-rates”;
– winbox – allow to change user password to empty one;
– winbox – allow to specify “connection-bytes” & “connection-rate” for any protocol in “/ip firewall” rules;
– winbox – allow to specify “sip-timeout” under ip firewall service-ports;
– winbox – allow to specify certificate type when exporting it;
– winbox – allow to specify interfaces that CAPsMAN can use for management;
– winbox – do not create empty rates.vht-basic/supported-mcs if not specified in CAPsMAN;
– winbox – do not create time field when copying CAPsMAN access list entry;
– winbox – do not try to disable dynamic items from firewall tables;
– winbox – fixed typo in “/system resources pci” list;
– winbox – hide “nat-traversal” setting in IPsec peer if IKEv2 is selected;
– winbox – removed “sfp-rate-select” setting from ethernet interface;
– winbox – show dynamic IPv6 pools properly;
– winbox – show errors on IPv6 addresses ;
– winbox – specify metric for “/ip dns cache-used” setting;
– winbox – updated fan management menu;
– wireless – added “station-roaming” setting;
– wireless – fixed rare wireless ac interface lockup;
– wireless – show comment on “security-profile” if it is set;
Pobierz