Kramer VP-731 Presentation Scaler-Switcher Oprogramowanie 1.13 Master
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: vp-730_731_fw_1.13.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
The following changes were made in this version:
Poprawki:
An issue with some DVD and Blu-ray players (for example Pioneer LX55 Blu-ray player) was fixed:
– Powering on the scalers with an LX55 Blu-ray player selected on HDMI 1 gives the normal information screen. Switching to another source on HDMI 2 gives a correct output. Switching from HDMI 2 back to the player on HDMI 1 gives no signal on the output. Unplugging and replugging the player reconnects it and gives a correct output.
Technical Notes:
– A switching problem with some DVD and Blu-ray players (for example Pioneer LX55 Blu-ray player) connected to HDMI inputs was fixed.
Firmware Upgrade Procedure
1. Acquire xxx.brec file with the required version of firmware.
2. Copy this file to the route directory on any USB readable memory device (disk-on-key, flash memory card etc.).
3. Plug the device with the firmware file into USB connector of the VP728/729 and switch osan the scaler.
4. Wait until the scaler boots up and then use OSD menu to navigate to Setup>Advanced Setup>Misc>Firmware Download
5. Use UP and DOWN arrows to highlight the required firmware file and press ENTER button.
6. Confirm the upgrade and wait until progress indicator gets to 100%.
7. Restart the scaler by recycling the power.
Pobierz