Keysight U8903B Audio Analyzer Oprogramowanie 3.3.8.0
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: R3.3.8.0.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Release Notes
Bug Fixes
– Fixed wrong amplitude in dBm when switching waveform in Analog Generator.
– Fixed unable to select file extension when saving graph.
– Fixed Voice Quality measurement unable to save result in folder with special characters.
– Fixed the crash at startup when loading with corrupted last power up settings.
– Fixed some bugs on analog analyzer and analog graph preset.
– Fixed the intermittent phase measurement error in continuous query caused by reference channel changing.
– Fixed analog variable phase waveform generation bug where the phase is reset to 0 after frequency changed from SCPI.
– Fixed the crash on when setting Function3 to any measurement function when Function1 and Function2 are set to none.
– Fixed a defect in streaming method of Bluetooth recording and playback in Voice Quality Module
New Features
– Enhanced the speed of TSA’s docx report creation.
– Enabled SCPI command, “MMEMory:STORe” to support .wav file.
– Added in the DATA:FILE SCPI command to transfer custom file from PC to unit and vice versa
U8903B firmware upgrade procedures
Perform the following procedure to update the U8903B firmware.
1. Save the firmware update files in an external USB flash storage.
2. Connect the external USB flash storage to the U8903B.
3. Press on the SYSTEM panel.
4. From the System menu page, press the Update softkey.
5. Press the Load File softkey and the recall menu page is displayed to enable you to select the source location.
6. Select the firmware file (xxx.bin) to be updated.
The firmware update process may take 20 minutes to 40 minutes to complete. DO NOT power off the U8903B.
Pobierz