Intel R1304RPOSHBN Server System EFI Oprogramowanie 03.03.0003
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: S1200RPS_EFI_BIOS03030003_BMC114_FRUSDR108.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Wersje:
– BIOS: 03.03.0003
– ME: 03.00.07.024
– BMC: 01.14.9309
– FRUSDR: 1.08
BIOS Changes in 03.03.0003:
– NOTICE: Capsule update method: If previous BIOS version is R02.02.0004 and earlier version, need use E3-1200 V3 CPU part boot to EFI shell, and use capsule files update BIOS to R03.03.0003 and update ME to 3.0.7.24,then replace with E3-1200 V4 CPU part to power on.
– EPSD100251166: System will auto reset when run Trusted Boot- measured launch(TBOOT) test
– ESS RC V119_03 integration
– [Security] Implemented BIOS lock before PCI bus emulation
– EPSD100249332: [RBP-RM] Virtual Machine can’t POST with E3-1200 V4 CPU after you install RemoteFX 3D video adapter
– EPSD100250117: BIOS update script does not check BIOS update failure, cause ME updated to latest version and does not match with on board old BIOS(startup Stript updated)
– EPSD100250117: [RBP] 4k monitor issue with E3-1200 CPU (Win2k12R2)
ME Changes in 03.00.07.024:
– Fixed: Platform does not go to S3/S4 state in recovery mode
– Fixed: Wrong value returned from Get Max Allowed Logical Processors command after S0->(S4,S3)->S0 transition
BMC Changes i 01.14.9309:
– Fixed: The BMC Lan IP cannot ping successful with new S1200RP MB.
– Update openssl from 0.9.8zf to 0.9.8zg to add fix for CVE-2015-1789.
– Fixed: Firefox version 38.0 or higher breaks with system with RMM4 and RMM3.
FRUSDR Changes in release 1.08:
– Fixed: The sensor reading of P1 MTT is always 0 in EWS(Intel Integrated BMC Web Console)
INSTALLATION NOTES:
– WARNING: It is very important to follow these instructions as they are written.Failure to update using the proper procedure may cause damage to your system.
UEFI iFlash32:
– Boot the system to EFI Shell
– Copy IFlash32.efi, ipmi.efi and BIOS.CAP file to a USB Flash Drive ( Do not use the Rec.CAP file as it will clear the NVRAM)
– It is recommended to copy full package
– Map the respective storage device in the system with the command Shell> map -r
– Change the Shell to mapped device file system. Example: Shell> fs0: (or fs1:)
– Run the IFlash32 utility at the prompt fs0:\> IFlash32 [File Name] /u /ni
– Either reboot the system and Go into BIOS setup <F2>, reset defaults <F9> and save <F10> or After the BIOS update and before rebooting, run: fS0:> Iflash32 -rd
– Reboot the system
Backup BIOS update instructions:
– Boot the system to EFI Shell
– Copy IFlash32.efi, ipmi.efi and BIOS .CAP file to a USB Flash Drive ( Do not use the Rec.CAP file as it will clear NVRAM)
– It is recommended to copy full package
– Map the respective storage device in system with the command Shell> map -r
– Change the Shell to mapped device file system. Example: Shell> fs0: (or fs1:)
– Run the IFlash32 utility on the prompt fs0:\> IFlash32 -u [File Name] UpdateBackupBios -ni
– It will update primary BIOS with processed capsule, and the backup BIOS update will be completed in next normal boot.
– Reboot the system.
IMPORTANT NOTICE:
– Need use recovery capsule file to downgrade/upgrade between R02.00.0×32 and before version BIOS (Including R01.04.0002 and before).
– R02.01.0002 and later version need use command “iflash32 -u RB_R02.0x.xxxxRec.cap UpdateBackupBios -ni” to upgrade from R01.04.0002 and early version. Similarly, R01.04.0002 and early version need use command “iflash32 -u RB_R01.0x.xxxxRec.cap UpdateBackupBios -ni” to downgrade from R02.01.0002 and later version.
– As security requirement, R03.01.0001 reversion and later version doesn’t support capsule downgrade to R03.00.0×43 and previous reversion(Including R02.02.0005 and before) in normal mode.
– As security requirement, R03.03.0003 reversion and later version doesn’t support capsule downgrade to R03.02.0004 and previous reversion(Including R02.02.0005 and before) in normal mode.
– Added a cold reset to ensure boot completion after Backup BIOS update trigged.
Pobierz