Hikvision DS-2CD2942F-I Network Camera Oprogramowanie 5.3.3
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: &file=IPC_R0_EN_STD_5.3.3_150610.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Ten pakiet zawiera niezbędne pliki instalacyjne Hikvision DS-2CD2942F-I Network Camera Firmware w wersji 5.3.3.
Poprawki:
– Supports new pw strategy.
Kroki instalacji:
1. Download the zip file . Once you have downloaded the file unzip it using your preferred unzipping tool and save the file to a sensible place.
2. Log into your camera.
3. Go to Configuration>System>Maintenance.
4. At the bottom of the Maintenanace page, under the ‘Remote Upgrade’ make sure that ‘firmware’ is selected from the drop down list. Now click browse and select the upgrade that you have saved. Once selected, click ‘upgrade’.
5. Once you start the upgrade you will be prompted that your device will reboot; click [OK]. The camera will now begin upgrading.
6. Once the camera has updated go to System>Device information and make sure the latest firmware has been installed.
Pobierz