Gigabyte GA-X99-SOC Force (rev. 1.0) Intel LAN Sterownik 19.1
Typ pliku: Sterownik.
System Operacyjny: Windows 7, Windows 8, Windows 8.1.
Nazwa pliku: mb_driver_lan_intel_x99.zip.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
Dane techniczne:
CPU:
– Wsparcie dla Intel Core i7 processors in the LGA2011-3 package
– L3 cache varies with CPU
Chipset:
– Intel X99 Express Chipset
Memory:
– 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
– 4 channel memory architecture
– Wsparcie dla DDR4 2133/1866/1600/1333 MHz memory modules
– Wsparcie dla non-ECC memory modules
– Wsparcie dla Extreme Memory Profile (XMP) memory modules
– Wsparcie dla RDIMM 1Rx8 memory modules (operates in non-ECC mode)
Audio:
– Realtek ALC1150 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Wsparcie dla S/PDIF Out
LAN:
– Intel GbE LAN chip (10/100/1000 Mbit)
Expansion Slots:
– 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
– 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
– 3 x PCI Express x1 slots
Multi-Graphics Technology:
– Wsparcie dla 4-Way/3-Way/2-Way AMD CrossFire/NVIDIA SLI technology
Storage Interface:
– 1 x M.2 Socket 3 connector (M2_20G)
– 1 x SATA Express connector
– 6 x SATA 6Gb/s connectors (SATA3 0~5)
– Wsparcie dla RAID 0, RAID 1, RAID 5, and RAID 10
– 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only
USB:
– 2 x USB 3.0/2.0 ports available through the internal USB header
– 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
– Chipset + 2 Renesas uPD720210 USB 3.0 Hubs:
– 8 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors:
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 1 x OC PEG Power Connector
– 1 x SATA Express connector
– 1 x M.2 Socket 3 connector
– 10 x SATA 6Gb/s connectors
– 1 x CPU fan header
– 1 x water cooling fan header (CPU_OPT)
– 3 x system fan headers
– 1 x heatsink LED power connector
– 1 x Thunderbolt add-in card connector
– 1 x OC Panel connector (for future expansion)
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 1 x USB 3.0/2.0 header
– 2 x USB 2.0/1.1 headers
– 1 x serial port header
– 1 x Clear CMOS jumper
– 1 x power button
– 1 x reset button
– 1 x Clear CMOS button
– 1 x Gear button
– 1 x OC Tag button
– 1 x OC Trigger switch
– 1 x CPU BCLK Down button
– 1 x CPU BCLK Up button
– 1 x CPU Ratio Down button
– 1 x CPU Ratio Up button
– 1 x Settings Lock button
– 1 x Direct to BIOS button
– 1 x OC PCIe switch
– 1 x OC Ignition button
– 1 x Clear Battery button
– 1 x DualBIOS switch
– 1 x onboard voltage measurement module
– Temp sensor ports
Back Panel Connectors:
– 4 x USB 2.0/1.1 ports
– 1 x PS/2 keyboard/mouse port
– 1 x CPU overclocking button
– 1 x BIOS switch button
– 1 x Clear CMOS button
– 8 x USB 3.0/2.0 ports
– 1 x RJ-45 port
– 1 x optical S/PDIF Out connector
– 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
I/O Controller:
– iTE I/O Controller Chip
H/W Monitoring:
– System voltage detection
– CPU/System/Chipset temperature detection
– CPU/CPU OPT/System fan speed detection
– CPU/System/Chipset overheating warning
– CPU/CPU OPT/System fan fail warning
– CPU/CPU OPT/System fan speed control
Form Factor:
– E-ATX Form Factor: 30.5cm x 26.4cm
Pobierz