Gigabyte GA-EP35-DS3R (rev. 2.1) Intel INF Sterownik 9.1.2.1007
Typ pliku: Sterownik.
System Operacyjny: Windows 2000, Windows 7, Windows Server 2003, Windows Vista, Windows XP.
Nazwa pliku: mb_driver_chipset_intel.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
CPU
1. Wsparcie dla Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium processor Extreme Edition/Intel Pentium D processor/ Intel Pentium 4 processor Extreme Edition/Intel Pentium 4 processor/ Intel Celeron processor in the LGA 775 package
2. L2 cache varies with CPU
3. 1600 (O.C.)/1333/1066/800 MHz FSB
Chipset
1. North Bridge: Intel P35 Chipset
2. South Bridge: Intel ICH9R
Memory
1. 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
2. Dual channel memory architecture
3. Wsparcie dla DDR2 1200 (O.C.)/1066/800/667 MHz memory modules
Audio
1. Realtek ALC889A codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Wsparcie dla S/PDIF In/Out
5. Wsparcie dla CD In
LAN
1. Realtek 8111B chip (10/100/1000 Mbit)
Expansion Slots
1. 1 x PCI Express x16 slots
2. 3 x PCI Express x1 slots
3. 3 x PCI slots
Form Factor
1. ATX (305 x 210mm)
Storage Interface
South Bridge:
1. 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices
2. Wsparcie dla SATA RAID 0, RAID 1, RAID 5, and RAID 10
GIGABYTE SATA2 chip:
1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2. 2 x SATA 3Gb/s connectors (GSATAII0, GSATAII1) supporting up to 2 SATA 3Gb/s devices
3. Wsparcie dla SATA RAID 0, RAID 1, and JBOD
iTE IT8718 chip:
1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
1. Integrated in the South Bridge
2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 4-pin ATX 12V power connector
3. 1 x floppy disk drive connector
4. 1 x IDE connector
5. 8 x SATA 3Gb/s connectors
6. 1 x CPU fan header
7. 2 x system fan headers
8. 1 x power fan header
9. 1 x front panel header
10. 1 x front panel audio header
11. 1 x CD In connector
12. 1 x S/PDIF In header
13. 1 x S/PDIF Out header
14. 2 x USB 2.0/1.1 headers
15. 1 x parallel port header
16. 1 x serial port header
17. 1 x chassis intrusion header
18. 1 x power LED header
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x coaxial S/PDIF Out connector
4. 1 x optical S/PDIF Out connector
5. 8 x USB 2.0/1.1 ports
6. 1 x RJ-45 port
7. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
1. iTE IT8718 chip
H/W Monitoring
1. System voltage detection
2. CPU/System temperature detection
3. CPU/System/Power fan speed detection
4. CPU overheating warning
5. CPU/System/Power fan fail warning
6. CPU fan speed control
BIOS
1. Supports DualBIOS Plus
2. 2 x 8 Mbit flash ROM
3. Use of licensed AWARD BIOS
4. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b.
Unique Features
1. Wsparcie dla @BIOS
2. Wsparcie dla Download Center
3. Wsparcie dla Q-Flash
4. Wsparcie dla EasyTune
5. Wsparcie dla Xpress Install
6. Wsparcie dla Xpress Recovery2
Zaleca się, aby zawsze używać najnowszej dostępnej wersji sterownika.
Nie zapomnij sprawdzać z naszą stroną tak często, jak to możliwe, aby być na bieżąco z najnowszymi sterownikami, oprogramowaniem i grami.
Spróbuj ustawić punkt przywracania systemu przed zainstalowaniem sterownika urządzenia. To pomoże, jeśli zainstalujesz niewłaściwy sterownik. Problemy mogą pojawić się, gdy urządzenie sprzętowe jest zbyt stare lub nie jest już obsługiwane.
Pobierz