Gigabyte G1.Assassin (rev. 1.0) BigFoot LAN Sterownik 6.0.0.16
Typ pliku: Sterownik.
System Operacyjny: Windows 7, Windows Vista, Windows XP.
Nazwa pliku: mb_driver_lan_bigfoot.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
CPU
1. Wsparcie dla Intel Core i7 series processor in the LGA1366 package
2. L3 cache varies with CPU
QPI
1. 4.8GT/s, 6.4GT/s
Chipset
1. North Bridge: Intel X58 Express Chipset
2. South Bridge: Intel ICH10R
Memory
1. 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory
2. 3/Dual channel memory architecture
3. Wsparcie dla DDR3 2200/1333/1066/800 MHz memory modules
4. Wsparcie dla non-ECC memory modules
5. Wsparcie dla Extreme Memory Profile (XMP) memory modules
Audio
1. 1 x Creative CA20K2 chip
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Wsparcie dla Dolby Digital Live/DTS Neo:PC/DTS Interactive
5. Wsparcie dla S/PDIF Out
LAN
1. 1 x Bigfoot Killer E2100 chip (10/100/1000 Mbit)
2. 1 x Marvell 88E1118R phy
Expansion Slots
1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
2. 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
3. 2 x PCI Express x1 slots
4. 1 x PCI slot
Multi-Graphics Technology
1. Wsparcie dla 3-Way/2-Way NVIDIA SLI technology and 4-Way/3-Way/2-Way ATI CrossFireX technology
Storage Interface
South Bridge:
1. 6 x SATA 3Gb/s connectors (SATA2_0~SATA2_5) supporting up to 6 SATA 3Gb/s devices
2. Wsparcie dla SATA RAID 0, RAID 1, RAID 5, and RAID 10
Marvell 88SE9182:
1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
2. Wsparcie dla SATA RAID 0 and RAID 1
USB
South Bridge:
1. Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
1 x Renesas D720200 chip and 2 x VLI VL810 hubs:
1. Up to 8 USB 3.0/2.0 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 2 x 8-pin ATX 12V power connectors
3. 2 x 4-pin PCIe 12V power connectors
4. 2 x SATA 6Gb/s connectors
5. 6 x SATA 3Gb/s connectors
6. 1 x CPU fan header
7. 1 x system fan header
8. 3 x fan headers
9. 1 x front panel header
10. 1 x front panel audio header
11. 1 x S/PDIF Out header
12. 2 x USB 2.0/1.1 headers
13. 2 x USB 3.0/2.0 headers
14. 1 x clearing CMOS jumper
15. 1 x Quick Boost button header
16. 1 x heatsink LED power connector
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x optical S/PDIF Out connector
4. 1 x coaxial S/PDIF Out connector
5. 4 x USB 2.0/1.1 ports
6. 4 x USB 3.0/2.0 ports
7. 1 x RJ-45 port
8. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out)
I/O Controller
1. iTE IT8720 chip
H/W Monitoring
1. System voltage detection
2. CPU/System temperature detection
3. CPU/System fan speed detection
4. CPU overheating warning
5. CPU/System fan fail warning
6. CPU/System fan speed control
BIOS
1. 2 x 16 Mbit flash
2. Use of licensed AWARD BIOS
3. Wsparcie dla DualBIOS
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
1. Wsparcie dla @BIOS
2. Wsparcie dla Q-Flash
3. Wsparcie dla Xpress BIOS Rescue
4. Wsparcie dla Download Center
5. Wsparcie dla Xpress Install
6. Wsparcie dla Xpress Recovery2
7. Wsparcie dla EasyTune
8. Wsparcie dla Dynamic Energy Saver2
9. Wsparcie dla Smart 6
10. Wsparcie dla Auto Green
11. Wsparcie dla eXtreme Hard Drive (X.H.D)
12. Wsparcie dla ON/OFF Charge
13. Wsparcie dla Cloud OC
14. Wsparcie dla Q-Share
Bundle Software
1. Norton Internet Security (OEM version)
Form Factor
1. XL-ATX Form Factor; 34.5cm x 26.3cm
Zaleca się, aby zawsze używać najnowszej dostępnej wersji sterownika.
Nie zapomnij sprawdzać z naszą stroną tak często, jak to możliwe, aby być na bieżąco z najnowszymi sterownikami, oprogramowaniem i grami.
Spróbuj ustawić punkt przywracania systemu przed zainstalowaniem sterownika urządzenia. To pomoże, jeśli zainstalujesz niewłaściwy sterownik. Problemy mogą pojawić się, gdy urządzenie sprzętowe jest zbyt stare lub nie jest już obsługiwane.
Pobierz