EVGA Z97 Stinger Core 3D BIOS 1.09
Typ pliku: BIOS.
System Operacyjny: AnyOS.
Nazwa pliku: E972_flashtool_109.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
BIOS 1.09 Updates:
– Support NVMe bootable device.
– Allow user to disable CSM item directly. User doesn’t need to change launch video mode.
– Add UEFI RAID Configuration in Advanced Page.
– Add USB profile function.
– Add load last saved settings function.
Windows Installation:
– Download the correct .zip for your motherboard
– First go into your BIOS and load defaults, save and exit
– Close all open programs.
– Go into the folder where you unzipped this package and update.bat
– Press Y to start the flash process
– DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
– After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
– UWAGA: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
BIOS Installation:
– Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
– Reboot the machine and go into the system BIOS
– From the BIOS, navigate to the Save & Exit tab and open “Select BIOS File.”
– Select the .bin file you wish to flash.
– After the flashing is finished, shut the system down completely. Then power on again.
– After flashing verify that the correct flash was applied by checking the version number on the lower right corner of the BIOS screen.
Pobierz