EVGA X99 FTW BIOS 1.12
Typ pliku: BIOS.
System Operacyjny: AnyOS.
Nazwa pliku: E997_112.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Poprawki:
– Improved “Auto” CPU C-State Control
– Fix TjMax Error when C1E is Enabled
– Improve 3200MHz Memory Support
Windows Installation:
– Download the correct .zip file
– First go into your BIOS and load defaults, save and exit
– Close all open programs.
– Go into the folder where you unzipped this package and update.bat
– Press Y to start the flash process
– DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
– After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
– UWAGA: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
BIOS Installation:
– Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
– Reboot the machine and go into the system BIOS
– From the BIOS, navigate to the Save & Exit tab and open “Select BIOS File.”
– Select the .bin file you wish to flash.
Pobierz