Dell LiteOn LMT-256M6M SSD Oprogramowanie DM8110F/A05
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 7, Windows 8, Windows 8.1, Windows Vista.
Nazwa pliku: LMT-256M6M-DM8110F_ZPE.exe.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
This package provides the firmware update for LiteOn IT LMT-256M6M MSATA 256GB, Revision DM8110F, and is supported on Precision, Latitude, XPS, and Alienware models.
Fixes & Enhancements
– Fixed SSD may not be detected under certain conditions.
Aktualizacja oprogramowania sprzętowego za pomocą narzędzia Windows
ATTENTION
1. Backup the Solid-State Drive.
2. Switch to AC Power.
Procedure
1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then Click “Update”.
3. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click “OK” to proceed.
4. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Please close all open applications and save your work before rebooting your machine.
5. The system will reboot and load the firmware. Once the firmware update is complete (screen will show firmware update done), you can boot into Windows.
6. To confirm the firmware update was successful, open Device manager – open SSD – click Properties – choose hardware ID under Details and check the firmware version.
Firmware upgrade through the DOS utility
ATTENTION
1. Backup the Solid-State Drive.
2. Switch AC Power.
3. The DOS utility supports only Intel systems.
Procedure
1. Go into the DOS sub-directory.
2. Insert a blank CD-R disc into your CD/DVD R/W drive.
3. Burn the ISO image into a CD-R media.
4. Insert the CD-R (created from the above steps) into the CD-ROM/DVD drive in the target system.
5. Boot your system from the CD/DVD drive (for instructions, please refer to the manual that came with your system).
6. Please select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click “Y” to proceed.
8. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Remove the CD-R from your CD/DVD drive, and reboot your system. It will boot into Windows.
9. To confirm the firmware update was successful, open Device manager – open SSD – click Properties – choose hardware ID under Details and check the firmware version.
Pobierz