Cisco RV320 Router Oprogramowanie 1.3.1.10
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: RV32X_v1.3.1.10_20160215-code.bin.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
New Features:
– FlexVPN (hub and spoke)
– OpenVPN
Resolved Issues:
– Bitmask of Circuit ID hex type doesn’t work (CSCus78529)
– Memory leak for mdnsd process (CSCuw02356)
– DHCP Range overlap error seen incorrectly (CSCut07184)
– Change the maximum number of IP&MAC binding entries to 80 (CSCus81690)
– IP & MAC Binding breaks DHCP server functionality (CSCuv64052)
– Remote management access stops working intermittently (CSCuu42921)
– SIP ALG not modifying all fields (CSCuv05601)
– IPv6 continuous pings can cause reboot (CSCuu90949)
– Only support lowercase letters in CLI command (CSCus60459)
– Error creating Port Forwarding for VLAN that is subnetted (CSCur83582)
– DHCP Offer does not respond Option 55 with item (0) padding (CSCuu62007)
– Bandwidth Management Rules limit sum of Max Rates to ISP Max BW (CSCut04618)
– RV320: WAN port goes inactive intermittently (CSCuu10991)
– Router blocks inbound SIP Invite intermittently (CSCuu00900)
– RV320: Incorrect error for USB modem when NSD is disabled on WAN (CSCut08978)
– IP & MAC Binding breaks DHCP server functionality (CSCuv64052)
– RV320: Huawei E3272lte 4G modem (CSCur08152)
– RV325: DWM-157 3G/4G modem is not available. ISP: Telenor, Norway
– RV320: Recognizes DWM-157, but SIM card is not recognized. ISP: Three UK
– RV320: Recognizes D-Link DMWM-157, no internet. Telenor, Hungary
– RV325: /28 Private IP Address should be under wrong subnet.
Caveats Acknowledged in Release 1.3.1.10:
– RV320: Inter VLAN routing not working with 1:1 NAT (CSCuv74771)
– iOS/MacOS built-in vpnclient can’t connect with split-tunnel mode (CSCuw30159)
– DDNS username won’t allow more than 25 characters (CSCuv78522)
– Allow Policies showing in logs when not enabled (CSCuw79932)
– RV320: DDNS account longer than 11/12 symbols is not accepted (CSCux99100)
Procedura instalacji:
– Zapisz pakiet do pobrania.
– Zaloguj się do interfejsu użytkownika routera.
– Przejdź do sekcji aktualizacji oprogramowania sprzętowego urządzenia bezprzewodowego.
– Wybierz obecne oprogramowanie i skonfiguruj router, aby zainstalować ten plik.
– Poczekaj, aż urządzenie przeprowadzi ten proces.
– W razie potrzeby uruchom ponownie urządzenie.
Pobierz