Canon imagePROGRAF iPF650 MFP Oprogramowanie Update Tool 3.40
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Vista, Windows XP.
Nazwa pliku: FUT-Win-340.exe.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Jak pobierać i instalować:
– Switch the printer on.
– When you have downloaded the file, decompress it on your computer hard disk.
– Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
– Access the Canon website and download the firmware corresponding to your printer.
– Put the downloaded firmware in the Data folder in the location where imagePROGRAF Firmware Update Tool is installed.
– From the Start menu, select Programs to execute imagePROGRAF Firmware Update Tool.
Caution:
– You must log into Windows as an Administrator before the installation.
– Before you start the firmware version update program, close any other applications that are running.
– Do not try to use the printer while the firmware version update program is running.
– If a print job is executing, cancel the print job or wait for the job to finish before you execute the version update program.
– Never switch off the target printer while the firmware version update program is running.
– If the firmware version update fails while writing to the flash ROM, you may not be able to start the printer. In this case, contact a Canon service center or the dealer where you purchased the printer.
Pobierz