Buffalo TS-2RZH NAS Oprogramowanie 2.46
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows Vista.
Nazwa pliku: ts2rz-v246.zip.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
New and Modified Features
– Port trunking with ports on expansion cards is now supported. If you configure port trunking with the ports, only “Dynamic link aggregation” will be available for the port trunking mode.
– Updated the OpenSSL library to version 1.0.2.
Backup Poprawki:
– Fixed a bug where backup failed when the TeraStation is connected to two or more networks in different address spaces.
Replication Poprawki:
– Fixed a bug where replication failed if any file handling occurred for the replication source target for more than 8 hours.
Network Poprawki:
– Fixed a bug where access restrictions with domain users reverted to “disabled” after restarting the unit.
Drives Poprawki:
– Fixed a bug where the E30 error message disappeared when restarting the TeraStation while a failed drive was connected and the RAID array was in degraded mode.
Settings Poprawki:
– Fixed a bug where a user shared folder access restrictions were not saved after configuration.
– Fixed a bug where a “No response received from NAS.” message is displayed when changing the language settings from ‘Management’ – ‘Name/Time/Language’ – ‘Language’.
Before updating the firmware:
– Please consult your local technical support representative if you experience any problems caused by this firmware update.
– Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.
– USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.
How to Use Updater:
– Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
– Close all applications. Also, stop or exit any firewall software.
– Extract the downloaded file and run “TSUpdater.exe”. When a TeraStation is detected, an update window will open.
– Select the TeraStation to update if multiple TeraStation are connected.
– Click “Update” and enter the TeraStation’s admin password.
– Click “OK”.
– Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.
– When the update is complete, a message will be displayed
Pobierz