Buffalo LS410D NAS Oprogramowanie 1.81
Typ pliku: Oprogramowanie.
System Operacyjny: Windows 7, Windows 8, Windows 8.1, Windows Server 2008, Windows Server 2012, Windows Vista, Windows XP.
Nazwa pliku: ls400-181en.zip.
Bit: 64 Bit.
Licencja: Darmowa.
Opis
Added and Modified Features:
– Improved recognition accuracy when connecting USB drives.
Bug Poprawki:
– Modified to deal with Samba programming vulnerabilities (CVE-2014-0178 and CVE-2015-0240)
– Fixed a bug where a backup job could not be added if the backup target folder contains full-width spaces in its name.
– Fixed a bug where a shared folder, user, or group could not be created if its name contains specific symbols.
– Fixed a bug where an invalid default gateway is configured when changing the IP address on NAS Navigator2.
Notes:
– Please consult technical support or your local representative if the firmware update causes unexpected problems.
– Do not turn the unit off until the update is finished. The update takes several minutes.
How to Update the Firmware:
– Connect the LinkStation properly and configure the LinkStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
– Close all applications. Also, stop or exit any firewall software.
– Extract the downloaded file and run “LSUpdater.exe”. When a LinkStation is detected, an update window will open.
– Select the LinkStation to update if multiple LinkStation are connected.
– Click “Update” and enter the LinkStation’s admin password.
– Click “OK”.
– Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.
– When the update is complete, a message will be displayed.
Pobierz