Atomos Shogun Inferno Recorder Oprogramowanie 9.01
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: ATOMSGI_9.01.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
New Function:
– ProRes RAW capture
– ProRes RAW playback
– Wsparcie dla Panasonic EVA1 Raw
– Enhanced focus peak options
– Sony Raw loop out support
– Arri file naming support
– HLG support for Panasonic GH5
– Added the option to pause video during slow motion playback
Poprawki:
– 9 April 2018
– 25% improvement in record <-> playback transition time
– Fixed occasional Record to Play mode switching issues
– Loop out during playback of 4kDCIp60 is now configured to 4kDCIp60 rather than 4kDCIp30.
– 9.01: Fixed an issue on some units where the screen appeared too dark when there was no video input.
Firmware Update Tutorial:
– Download and unzip the file.
– Copy the file onto a recommended, formatted driver, using the docking station included with your recorder.
– Insert the drive into the Atomos recorder while it’s off.
– Power up the Atomos recorder.
– The screen will show flashing lines of color. This is normal – DO NOT power off!
– Updating will take a few minutes.
– Once completed, the Atomos recorder will power down.
– Power up the Atomos recorder again.
– Check Menu > Product Info > AtomOS Version. This should match the version you have just downloaded.
– Enjoy your updated Atomos recorder !
Firmware Recovery Tutorial:
– Power down the Atomos recorder (Hold power button for 4 seconds).
– Hold down the power button for 10 seconds approximately.
– You will see the “Firmware Update Failed” screen.
– Insert your HDD / SSD.
– The install process will begin and the screen will show flashing lines of color. This is normal – DO NOT power off !
– Once completed, the Atomos recorder will power down.
– Enjoy your updated Atomos recorder !
Pobierz