ASUS WL-500bv2 Oleg Custom Oprogramowanie 1.9.2.7-8
Typ pliku: Oprogramowanie.
System Operacyjny: AnyOS.
Nazwa pliku: WL500bv2-1.9.2.7-8.zip.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Changes:
– Patched to WL-500W 1.9.8.5 firmware base code (New drivers for wl and et: 4.108.9.0)
– Added support for WL500W
– Added support for WL320gE/gP, additional lights are not supported (use WL550gE firmware)
– Added a handling for DHCP supplied routes (Use Route page to enable/disable)
– Multicast/IPTV: no longer need routes to be specified, cleaned up igmp logs
– It’s now possible to specify DNS server IP address in the AP mode (added to IP Config page)
– Added new flashfs option: try ‘flashfs enabled’ to enable flashfs loading forever
– Added new http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable repository: use ‘ipkg.sh install ipkg-opt’ during initial ipkg installation
– Fixed PPPoE clamping code (set Maximum Segment Size to actual MTU)
– L2TP: server name resolution, persist/reconnect fixes
– NFS: added statd for proper locking
– SMB: Server string, new r/w share mode
– /etc/fstab: swapon and post-mount called now properly
– USB storage detection should work correctly for Philips mass storage devices
– /proc/cpuinfo now reports CPU model, revision and packaging options
– Changed connection tracking TCP timeout to 6 hours vs. 5 days
– Some WL-HDD IDE fixes
– Yet more fixes for built-in flash support (WL-500gP, WL-500W)
– Some minor kernel fixes
Important changes:
To reset username/password you’ve to reset to defaults using a RESET/RESTORE button!
– Port numbers used for RAW printing are changed: use 9100 for USB and 9101 for LPT
– Root fs is now ext3
– All scripts should now have
#!/bin/sh
line, otherwise they will not work
– post & pre scripts are now stored in the /usr/local/sbin directory; there is no /usr/local/init anymore
– post-firewall script should be adjusted, be careful when adding rules with -A – this will no longer work correctly, due to unconditional rule. Check the iptables -L -v output
– Client mode is not supported by the WL-500bv2 units
OSTRZEŻENIE:
DON’T TRY CUSTOM FIRMWARES UNLESS YOU KNOW WHAT YOU ARE DOING, YOU COULD DESTROY YOUR UNIT BY DOING THIS! I’M NOT RESPONSIBLE TO ANY DAMAGE CAUSED TO YOUR UNIT BY USING IT! USE ON YOUR OWN RISK!
Pobierz