ZOOM G5 Guitar Pedal Firmware 1.20
Tipo di file: Firmware.
Sistema Operativo: Windows 7, Windows 8, Windows Vista, Windows XP.
Nome del file: G5_v1.20_Win_E.zip.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
Follow these procedures to update the firmware:
1. Before updating the firmware, disconnect all MIDI and audio devices connected by USB to the PC that you are using. You should also quit all applications running on the PC.
2. Connect the AC adapter to the G5 and, with the G5 POWER switch OFF, connect the G5 with the PC using a USB cable. Then, while pressing and holding foot switches 1 and 2, turn the G5 power ON.
This prepares the G5 to receive a firmware update. The G5 displays the following message, showing that it is ready for a firmware update.
CAUTION:
– If Edit&Share is launched when the G5 is connected to the PC, the firmware update will not occur correctly, so quit Edit&Share if it is launched.
3. Update the SYSTEM firmware. Double-click the “Zoom G5 System v1.20 Updater.exe” included in the download to launch the firmware updater application.
CAUTION If you are using Windows 8, when a “Windows protected your PC” message appears, click “More info” and then click “Run Anyway”.
4. Confirm that “ZOOM G3 Series” appears in both the MIDI IN and MIDI OUT fields. If it does not, click the fields and select “ZOOM G3 Series” from the lists of MIDI devices.
NOTE: If using Windows XP, “USB Audio Device” should appear in the MIDI IN and MIDI OUT fields instead of “ZOOM G3 Series”.
5. Click the “Execute” button to update the firmware.
While updating, a progress bar shows the status.
CAUTION Do not disconnect the USB cable during the firmware update!
6. When the firmware update completes, a message like this appears.
Click Exit to quit the firmware updater application. Set the POWER switch to OFF when “Complete!” appears on the G5 display.
CAUTION If updating the firmware fails, conduct the firmware update again using a USB 2.0 port.
This completes the firmware update.
Download