Sony VPL-VW5000ES Projector Firmware 4.301
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: sony_pjupdate_2015_4301_pjg_auth.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
This utility updates the system software to version 4.301 and provides the following changes and benefits:
Improvements over version 4.203:
– Further improvement of HDR-related functionality:
Adds the HDR Contrast function to the Picture Menu (when viewing HDR content) to allow adjustment of the average screen brightness
Adds automatic selection of BT.2020 color space when receiving such content
Adds an HDR indicator in the Information Menu when HDR content is being received
– Adds Lens Center Return function
– Improves overall picture quality
– Adds minor bug fixes
Benefits provided by previous updates and included in version 4.301:
– Picture quality and noise reduction improvements
– Improved HDR tone mapping
– Improvement for 3D crosstalk
– Supporto per SNMP
Firmware Installation Instructions
ATTENZIONE: Do not power off the projector or disconnect it from the AC power outlet. Doing so may damage the projector to the point of requiring repair.
AVVERTIMENTO:
Do not attempt to operate the projector until the update is complete. Doing so may damage the projector to the point of requiring repair.
IMPORTANT:
Please do not remove the USB storage device until instructed to do so.
– Power off the projector.
– Make sure no other USB device is connected to the projector before starting the update.
– Insert the USB storage device containing the update folder into USB port of the projector.
– Power on the projector. The update process starts automatically.
Note: The ON/STANDBY indicator will blink green and then amber during the update process. The update process takes about 5 minutes to complete.
– Once the update is complete, the ON/STANDBY indicator will light up red, and the projector will enter Standby Mode.
– Rimuovere il dispositivo USB.
– Power on the projector.
Note: After the update, the initial power on takes about 15 minutes to light the laser. During this period, the ON/STANDBY indicator will blink green and the fan will spin at high-speed. Do not power off the projector or disconnect it from the AC power outlet.
– Once the projector completely starts and the laser is lit, the update process is complete.
– Check the current firmware version to confirm that the update has successfully installed.
Note: If the version number is 4.301, the firmware update was successful.
Download