Ricoh PX Digital Camera Firmware 1.11 per XP/Vista
Tipo di file: Firmware.
Sistema Operativo: Windows Vista, Windows XP.
Nome del file: px-111.exe.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
Correzioni:
When an Eye-Fi card is inserted in the camera, and if you are going to begin shooting movies immediately after the camera starts up, the movie shooting may not start.
Firmware installation steps:
1. Copy the firmware to the SD memory card.
2. Remove the SD memory card from the PC card reader/card slot and insert it into the camera
3. Turn on the camera
4. Press the MENU/OK button
5. Select [Adv.shooting options] in [Quick shooting menu] and press the MENU/OK button
6. Press the left button and then the down button to display [Setup]. Press the right button and then the up button to select [Check Firmware Ver.], and press the right button.
– A message confirming the firmware update will appear on the picture display.
– If the confirmation message does not appear, confirm whether the firmware file has been properly saved on the SD memory card.
7. Press the right button to select [Yes] and press the MENU/OK button.
– The firmware update will start, and the message shown below will display on the picture display.The firmware update should take about 30 seconds to complete.
– When the update is complete, the camera will restart.
8. Confirm that the updated version is displayed in the picture display.
9. Spegni la videocamera.
Download