Panasonic WV-SC387 Network Camera Firmware 1.90
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: sw397_190E_cam_107.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Issue (Phenomenon):
– Added “15s” and “25s” to the “Dwell time” of “Preset position”.
– Added “0s”, “1s”, “2s”, “3s”, “4s”, “15s” and “25s” to the “Dwell time” of “Auto pan”
– Added “Alarm area No.” setting to the “Preset per sender”.
– Added “VBR” to the “transmission priority” of H.264.
– Improved showing “Total use time” correct in [Status] tab of the “maintenance” page. Also see the Driver Firmware Versions 1.07 and 3.25.
– Added a notice for each screen that alarm notification will not be appeared while displaying VMD and audio detection.
– Regarding the header (WS-Addressing) which is attached with ONVIF commands, supported WS-Addressing in August 2004, used to bethe one in August 2005 only.
– Improved picture quality such as Brightness, Focus, Super Dynamic range and Contrast.
Updating a camera’s firmware
– Download the latest firmware file and save it on your PC.
– Click the [Maintenance] tab.
– On the left side of the screen under [Maintenance], click [Update Firmware].
– Click [Update Firmware]. The camera will automatically restart.
– After the camera restarts, a dialog prompts you to select the firmware file.
– Click [Browse…]. A dialog prompts you to specify the location of the firmware file.
– Select the firmware file you downloaded from the Panasonic Network Camera website and click [Open]. The selected file name is displayed.
– Confirm the file name, then click [Update Firmware].
– The [Updating firmware.] screen is displayed, and then the [Restarting now…] screen is displayed.
– When the firmware update is complete, the camera’s top page is displayed.
– You can confirm the camera’s firmware version on the top page.
– Confirm the camera’s new firmware version on the top page.
– Do not turn off the power during a firmware update.
– All images buffered in the internal memory are deleted when the firmware is updated.
– All alarm logs are deleted when the firmware is updated.
– You can also use the Setup Program to update the camera’s firmware.
– The camera’s current firmware version can be confirmed on the [Top] page and the [Status] page.
– It might take ten minutes or more to update the firmware according to the network conditions.
Download