Nikon WR-1 Wireless Remote Firmware 1.01
Tipo di file: Firmware.
Sistema Operativo: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista.
Nome del file: F-WR1-V101W.exe.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
I cambiamenti:
– The D5 and D500 ISO sensitivity displays are now supported. If you are using two WR-1 units, one as a receiver and the other as a transmitter, update both to firmware version 1.01.
– When used as a transmitter to change ISO sensitivity for a receiving camera, the WR-1 no longer cycles continuously through the available values.
WR-1 firmware updates can be performed with:
– D5, D4S, D4, Df, D810A, D810, D800, D800E, D750, D500, D7200, and D7100 cameras
– Other cameras cannot be used to upgrade WR-1 firmware.
Viewing the WR-1 Firmware Version
On the Camera
– Attach the WR-1 to the camera and slide the Tx/Rx/OFF switch to Rx.
– Accendi la fotocamera.
– Press the camera MENU button and select Firmware version in the SETUP MENU.
– Check the WR-1 firmware version (“W”).
– Spegnere la fotocamera.
On the WR-1
– Slide the Tx/Rx/OFF switch to Tx or Rx.
– Press MENU and highlight VERSION using the multi selector.
– Check the firmware version.
– Slide the Tx/Rx/OFF switch to OFF.
Updating the Firmware:
– Creare una cartella sul disco rigido del computer e nominarla come desiderato.
– Download the file to the folder created.
– Run the package to extract the following folder named “WR1Update”.
– Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.
– After attaching the WR-1, insert the memory card into Slot 1 on the camera, turn the camera on, and slide the WR-1 Tx/Rx/OFF switch to Rx.
– Selezionare Versione firmware nel MENU IMPOSTAZIONI e seguire le istruzioni sullo schermo per completare l’aggiornamento del firmware.
– Al termine dell’aggiornamento, spegnere la fotocamera e rimuovere la scheda di memoria.
– Confermare che il firmware è stato aggiornato alla nuova versione.
Download