Nikon SB-5000 TTL Flash Firmware 14.004 per macOS
Tipo di file: Firmware.
Sistema Operativo: Mac.
Nome del file: F-SB5000-V14004M.dmg.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Risolti i seguenti problemi:
– In support of the NIKKOR Z 58mm f/0.95 S Noct lens, the product can now display an aperture of f/0.95.
The following cameras can be used to update SB-5000 firmware:
– Z7 and Z 6
– D5, D4S, Df, D850, D810, D810A, and D750
– D500, D7500, D7200, D5600, D5500, D5300, D3500, D3400, and D3300
Be sure to update to the camera firmware for the following cameras to the latest version before updating the firmware for the SB-5000.
– D4, D800, D800E, D610, and D600
– D7100, D5200, and D3200
Nota importante:
– Other cameras cannot be used.
– Updates can be performed for you by a Nikon-authorized service representative.
Viewing the Flash Unit Firmware Version On the Camera:
– Attach the SB-5000 to the camera and turn both the camera and flash unit on.
– Press the camera MENU button and select Firmware version in the SETUP MENU to display the SB-5000 firmware version.
– Check the SB-5000 firmware version.
– Turn the camera and flash unit off.
Viewing the Flash Unit Firmware Version On the SB-5000:
– Turn on the SB-5000.
– Press the MENU button and use the multi selector to select (Setup menu) > .
– Check the SB-5000 firmware version.
– Turn the flash unit off.
Updating the Flash Unit Firmware
– Creare una cartella sul disco rigido del computer e nominarla come desiderato.
– Download and run the firmware package to extract the following file to a folder named “SB5000Update”
– Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.
– Insert the memory card in the camera. If the camera allows you to select one slot as the primary slot and the other as the secondary slot, insert the card into the slot currently selected as the primary slot. Otherwise insert the card into Slot 1.
– Attach the SB-5000 to the camera and turn on the camera and flash unit.
– Press the camera MENU button, select Firmware version > Update in the SETUP MENU, and follow the on-screen instructions to perform the firmware update.
– Once the update is complete, turn off the camera and flash unit and remove the memory card.
– Turn on the camera and flash unit and confirm that the firmware has been updated to the new version.
Download