Nikon D500 Camera Firmware 1.02
Tipo di file: Firmware.
Sistema Operativo: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista.
Nome del file: F-D500-V102W.exe.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
I cambiamenti:
– Addressed an issue that sometimes caused errors with certain UHS-II SD memory cards. As we were able to confirm that these were read errors arising not in the camera but in the cards themselves, we addressed the issue with a work-around that switches temporarily to UHS-I mode when a card-side error occurs in UHS-II mode. The camera switches back to UHS-II mode when turned off and then on again or when the standby timer restarts. Card-side read errors may still occur after the update, albeit very infrequently.
Confirming the firmware version
– Accendi la videocamera.
– Press the camera’s MENU button and select Firmware version from the setup menu.
– The camera’s A and B firmware versions will be displayed.
– Spegni la videocamera.
Procedura d’installazione:
– Download and extract the new firmware
– Copy the firmware to the memory card
– Insert the memory card containing the firmware into the camera memory card slot.
– Accendi la fotocamera. If you are updating flash unit firmware, turn the flash unit on as well.
– Press the to display the menus.
– Select Firmware version in the setup menu.
– The current firmware version will be displayed. Highlight Update and press the .
– A firmware update dialog will be displayed. Select Yes.
– The update will begin. Follow the on-screen instruction during the update.
– Confirm that the update was completed successfully.
– Turn the camera off and remove the memory card.
– Format the memory card in the camera.
During the update, do not:
– Remove the memory card
– Turn the device off
– Operate device controls
– Attach or remove lenses, mount adapters, or flash units
– Unplug or disconnect the AC adapter
– Remove the battery
– Subject the device to powerful electromagnetic noise
Download