Nikon D5 Camera Firmware 1.40 per macOS
Tipo di file: Firmware.
Sistema Operativo: Mac.
Nome del file: F-D5-V140M.dmg.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Risolti i seguenti problemi:
– Added support for Type B CFexpress memory cards. For more information, see the Nikon support website for your country or region.
– Users can now choose the band (2.4 or 5 GHz) for the host SSID when connecting to wireless networks via a WT-6 or WT-5 wireless transmitter attached to the camera. The band is listed in Connection Wizard network-selection dialog and post-connection in the Network display.
– Fixed an issue that prevented normal shutter release and caused an error to be displayed if all the following conditions were met during shooting in photo live view: A Type E lens and a flash unit such as the SB-5000 were attached ; A shutter speed of 1/500 s or faster was selected with Auto FP High-Speed Sync enabled ; Single frame was selected for release mode, or self_time (Self-timer mode) was selected with the number of shots for Custom Setting c3 (Self-timer) set to 1.
– Note: For information on the license for the open-source software included in the camera’s NVM Express driver, see “BSD License (NVM Express Driver)”.
Notice:
– Users of the software listed below will need to update to the following versions to support the changes in this firmware update: Camera Control Pro 2 version 2.25.1 or later, ViewNX-i version 1.2.8 or later
Visualizzazione della versione del firmware della fotocamera:
– Accendi la fotocamera.
– Premere il pulsante MENU della fotocamera e selezionare Versione firmware nel SETUP MENU per visualizzare la versione del firmware della fotocamera.
– Controllare la versione del firmware della fotocamera.
– Spegnere la fotocamera.
Aggiornamento del firmware della fotocamera:
– Creare una cartella sul disco rigido del computer e nominarla come desiderato.
– Download and run the firmware to extract the following file to a folder named “D5Update”
– Using a card slot or card reader, copy .bin to a memory card that has been formatted in the camera.
– Inserire la scheda di memoria nello slot 1 sulla fotocamera e accendere la fotocamera.
– Select Network in the SETUP MENU and confirm that OFF is selected for Network connection.
– Selezionare Versione firmware nel MENU IMPOSTAZIONI e seguire le istruzioni sullo schermo per completare l’aggiornamento del firmware.
– Al termine dell’aggiornamento, spegnere la fotocamera e rimuovere la scheda di memoria.
– Confermare che il firmware è stato aggiornato alla nuova versione.
Download