Nikon D4S Camera Firmware C:1.30
Tipo di file: Firmware.
Sistema Operativo: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista.
Nome del file: F-D4S-V130W.exe.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
I cambiamenti:
– An External recording control option has been added to the HDMI item in the SETUP MENU. If the camera is connected via HDMI to a third-party recorder that supports the Atomos Open Protocol (the Atomos SHOGUN, NINJA2, or NINJA BLADE), selecting On allows camera controls to be used to start and stop recording. More information is available in a supplementary manual.
Nota:
– Choose an option other than 576p (progressive) or 480p (progressive) for HDMI > Output resolution in the SETUP MENU.
– Choose an option other than Auto for HDMI > Output resolution in the SETUP MENU when 640x 424; 30p or 640x 424; 25p is selected for Movie settings > Frame size/frame rate in the SHOOTING MENU.
Risolti i seguenti problemi:
– In rare cases, the shutter would not be released when the user attempted to take photographs in movie live view.
– About 4 seconds of static could be heard on audio recorded with external HDMI recorders during movie live view.
– Exposure compensation would fail to produce the desired results if a negative value was selected when NEF (RAW) images were processed using the NEF (RAW) processing option in the RETOUCH MENU.
– Images would in rare cases fail to record correctly with HDR (high dynamic range) selected in the SHOOTING MENU.
– In portrait orientation, the monitor would not show the focus point in the correct location if 5:4 (30×24) was selected for Choose image area.
Viewing the Camera Firmware Version
– Accendi la fotocamera.
– Premere il pulsante MENU della fotocamera e selezionare Versione firmware nel SETUP MENU per visualizzare la versione del firmware della fotocamera.
– Controllare la versione del firmware della fotocamera.
– Spegnere la fotocamera.
Updating the Camera Firmware
– Download and run the file.
– Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
– Insert the memory card into the primary slot on the camera and turn the camera on.
– Select Network in the SETUP MENU and confirm that Disable is selected for Network connection.
– Selezionare Versione firmware nel MENU IMPOSTAZIONI e seguire le istruzioni sullo schermo per completare l’aggiornamento del firmware.
– Al termine dell’aggiornamento, spegnere la fotocamera e rimuovere la scheda di memoria.
– Confermare che il firmware è stato aggiornato alla nuova versione.
Download