NETGEAR JGS524Ev2 Switch Firmware 2.6.0.35
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: JGS524PE_JGS524Ev2_V2.6.0.35.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
New Features & Enhancements:
– Added a new Port Description column to Port Status Table in the local browser interface.
– In the local browser interface, change page title from NETGEAR ProSAFE Plus Switch to NETGEAR JGS516PE and NETGEAR GS116Ev2.
– In the help section of the local browser interface, links to Documentation and Support will now open up in the same language as selected for the local browser interface.
Security Correzioni:
– PSV-2018-0542
– PSV-2018-0612
AVVERTIMENTO:
– After JGS516PE and GS116Ev2 are upgraded to FW version V2.6.0.21 or higher, it cannot work with Plus Utility version prior to V2.7.2.
– Do not interrupt the network connection or power to the switch, or refresh or close the browser window during this process. Do not disconnect any Ethernet cables or power off the switch until the process is complete.
Upgrade Procedure:
– Download the new firmware and store it in local PC.
– Unzip it to get the switch firmware image (.bin format).
– Go to GUI page “Maintenance > Firmware Upgrade”
– Click the Browse button and locate and select the new firmware image file.
– Click the Apply button.
– When the upgrade is complete, your switch restarts. The upgrade process typically takes about three minutes.
Download