NETGEAR EX7000 Range Extender Firmware 1.0.1.80
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: EX7000_V1.0.1.80_1.0.144.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
New Features and Enhancements:
– Supports the proper power table for China.
Bug Correzioni:
– Fixes the issue were a memory leak occurred due to an unstable connection.
– Fixes the issue where authentication with certain Asus routers failed due to an unstable connection.
– Fixes an issue where the 2.4 GHz in HT40 mode was extended during the initial stage.
– Fixes the issue where cloning the root AP SSID for the Ethernet backhaul failed.
– Fixes the issue where the registration page displayed twice.
– Fixes the issue where the 2.4 GHz or 5 GHz SSID name changed after performing the WPS function.
– Fixes the issue where the client failed to get an IP address when roaming.
– Fixes the issue where a reboot occurred after connecting to the root AP.
– Fixes the issue where the sync function failed.
– Fixes the issue where the wrong GUI page displayed when extender connected to the root AP with dual band.
– Fixes the issue where the extender failed to connect to a hidden network when the channel was higher than channel 48.
To Upgrade:
– Download and extract the new firmware to a convenient place such as your desktop.
– Log in to the device using a Web browser.
– Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
– Click Maintenance > Firmware Upgrade
– Click Browse and find the file you just downloaded.
– Click Upload. While the firmware is loading, do not interrupt the upgrade process.
– The unit reboots when the update is complete.
– After the unit boots up and the Netgear logo LED becomes steady white, log in the unit again.
– To check that the update was successful, log in to the router again and check the firmware version.
Nota importante:
– To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
– The upgrade process is completed when the on screen progress bar completes.
– EX7000 don’t have power LED. It has three LED’s above the LAN LED.
– If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, please see the two arrows LED (Device to Extender LED). During upgrading, this LED will blink amber. After firmware upgrade is done and boots up the system, it changes to steady green color.
– Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it may result to a corrupt firmware and cause the device not to work.
Download